Surge Arrester, 20kA, 350 V, DIN Rail Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Acti9 iPRD Quick Surge Arresters

Acti 9 iPRD DIN rail Surge Protector Devices are geared to absolute safety and improved continuity of service

Maximum discharge current 8 to 65 kA
Integrated disconnector for short-circuit current withstand, Isc, up to 25 kA
Maximum steady state voltage, Uc = 260, 440 V
Fixed or withdrawable surge arresters

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Maximum Surge Current 20kA
Voltage Protection Rating 350 V
Range Acti 9
Series iPRD
Mounting Style DIN Rail
Length 94mm
Width 131.5mm
Depth 75.9mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Dimensions 94 x 131.5 x 75.9 mm
Operating Temperature Range -25 → +60 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25/10/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
672,00
(excl. BTW)
813,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
672,00 €
Related Products
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...
The FLT-SEC lightning arresters combine surge protection and ...
Description:
The FLT-SEC lightning arresters combine surge protection and backup fuse in a single connectors.It is no longer necessary to install a separate arrester backup fuse; this save space and reduces installation costs.
The STF Series active tracking filter from SolaHD. ...
Description:
The STF Series active tracking filter from SolaHD. This series offers active tracking technology to guard against commonly occurring and very damaging lower energy transients while offering excellent performance in noise reduction. These filters continuously track the input AC power ...
The STV 100K series from SolaHD. These hardwired ...
Description:
The STV 100K series from SolaHD. These hardwired surge protective devices are designed for installation at the service entrance, branch panel or a dedicated sensitive electronic load. The STV 100K series contains the highest levels of safety built into the ...