Surge Arrester, 2kA, 350 V, DIN Rail Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Acti9 iPRD Quick Surge Arresters

Acti 9 iPRD DIN rail Surge Protector Devices are geared to absolute safety and improved continuity of service

Maximum discharge current 8 to 65 kA
Integrated disconnector for short-circuit current withstand, Isc, up to 25 kA
Maximum steady state voltage, Uc = 260, 440 V
Fixed or withdrawable surge arresters

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Maximum Surge Current 2kA
Voltage Protection Rating 350 V
Range Acti 9
Series iPRD
Mounting Style DIN Rail
Length 94mm
Width 113.6mm
Depth 75.9mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Operating Temperature Range -25 → +60 °C
Dimensions 94 x 113.6 x 75.9 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
488,07
(excl. BTW)
590,56
(incl. BTW)
Aantal stuks
Per stuk
1 +
488,07 €
Related Products
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...
Complete surge protector for analogue telecommunication interface surge ...
Description:
Complete surge protector for analogue telecommunication interface surge protection.Comprising a socket and a connector, the latter may be unplugged without causing system outage, thereby allowing easy maintenance.For mounting on DIN rail.Screw connection.
These surge protection devices are recommended for locations ...
Description:
These surge protection devices are recommended for locations having a high exposure to lightning, for example, light entrances to buildings protected by lightning rods or powered by aerial lines. These products are installed at the entrance of the installation (such ...
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...