Industrial Surge Protector, 15kA, 350 V, Plug In Mount

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Acti9 iPRD Surge Arresters

Class-2 insulation
Maximum discharge current: 8 to 65 kA
Maximum continuous operating voltage, Uc = 340, 460 V
iPRD withdrawable surge arresters allow quick replacement of damaged cartridges

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specificaties
Kenmerk Waarde
Maximum Surge Current 15kA
Voltage Protection Rating 350 V
Range Acti 9
Series iPRD
Mounting Style Plug In
Length 50mm
Width 12mm
Depth 57mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Dimensions 50 x 12 x 57 mm
Operating Temperature Range -25 → +60 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
58,66
(excl. BTW)
70,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
58,66 €
Related Products
Monobloc lightning arrester with integrated protection between active ...
Description:
Monobloc lightning arrester with integrated protection between active conductor and earth in common mode, and protection between phase and neutral differential mode. Bio-polar arrester (phase + neutral) type 2 type OVR plus N1 10 275 Surge voltage: 1000 volts Maximum ...
The Phoenix Contact Plug-in lightning current arrester used ...
Description:
The Phoenix Contact Plug-in lightning current arrester used for 1-phase power supply networks with separate N and PE (L1, PE, N) mode of protection. V-0 flammability rating according to UL 96-40°C to 80°C ambient temperature Surge protection fault message.
A range of 50 Ω N type coaxial ...
Description:
A range of 50 Ω N type coaxial surge devices designed to protect RF and communications equipment from lightning strikes and high-voltage surges. These robust surge protectors have brass housings with a tri-metal plating and gold plated contacts. The coaxial ...
The RS Pro Type G - British 3-pin ...
Description:
The RS Pro Type G - British 3-pin surge protected plug is an ideal solution for home, office and industrial use. The 10 A plug is hard wired to ensure that the surge protector remains with the intended equipment. It's ...