Hirschmann Ethernet Switch, 5 RJ45 port DIN Rail Mount, 5 Port

  • RS-stocknr. 420-3506
  • Fabrikantnummer 943732003
  • Fabrikant Hirschmann
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

5-Port Ethernet Switch

Plug and play network installation
Full/half duplex auto-negotiation
Auto polarity correction
Store and forward switching
Power, data, port link and fault status
24Vdc operating voltage (19-30V range)
Fault tolerant via redundant power supply
DIN rail mount rugged metal housing
Range 100m

Specificaties
Kenmerk Waarde
RJ45 Ports 5
Mounting DIN Rail
Depth 80mm
Height 145mm
Maximum Supply Voltage 31V dc
Width 40mm
Dimensions 40 x 80 x 145mm
Number of Ports 5
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
496,45
(excl. BTW)
600,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
496,45 €
Related Products
The Ha-VIS eCon 2000 Full Gigabit family of ...
Description:
The Ha-VIS eCon 2000 Full Gigabit family of unmanaged Ethernet Switches offer plug & play solution for DIN rail-mounted connectivity. One main benefit of the eCon 2000 series is the extremely flat construction and frontal port mounting of the switches. ...
Scalance Xb205-3 Manageable Layer 2 IE-Switch 5x 10/100 ...
Description:
Scalance Xb205-3 Manageable Layer 2 IE-Switch 5x 10/100 Mbits/S RJ45 Ports 3x MM FO ST-Port 1x Console Port Diagnostics-Led Redundant Power Supply Temp.-RANGE 0 Deg C Up To +60 Deg C, Din Rail Mounting,Default Profinet.
The Antaira industrial Gigabit unmanaged Ethernet switch which ...
Description:
The Antaira industrial Gigabit unmanaged Ethernet switch which supports 5-Port 10/100Tx RJ45 fast ethernet. It gives high EFT and ESD protection to protect against unregulated voltage. Rating IP30 Rugged metal case designSupports auto MDI/MDI-X functionStore and forward switching architecture.
Communications connector: 4 x RJ‑45 jacks with MDI‑X ...
Description:
Communications connector: 4 x RJ‑45 jacks with MDI‑X assignment 10/100 Mbps (half / full duplex), autopolarity, autonegotiationNetwork cable: A standard Ethernet cable can be connected to the Ethernet interface. However, to minimize electromagnetic interference, Siemens recommends a shielded Ethernet cable ...