Turck Inductive Sensor - Barrel, PNP-NO Output, 1 mm Detection, IP67, Cable Terminal

  • RS-stocknr. 830-7671
  • Fabrikantnummer BI 1-HS540-AP6X
  • Fabrikant Turck
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

BI 1 Series

The BI 1 Series of inductive proximity sensors from Turck Banner.

Turck Banner Barrel Inductive Proximity Sensors

Inductive sensors are designed for contact-less and wear-free detection. They are the perfect solution for breweries, frozen food, dairies and packaging applications. Resistant to cleaning agents and disinfectants and exceed the protection classes IP68 & IP69K. These sensors are available as standard versions in chrome plated brass barrels or stainless steel housing with LCP front cap and double lip seal for heavy use or sudden changes in temperature. All inductive sensors of the new uprox+ generation operate with highest switching distances, feature an extended temperature range and are easily mounted.Turck inductive proximity sensors are manufactured with shielded coil, designated by “Bi” in the part number, and a non-shielded coil, designated by “Ni” in the part number.

Specificaties
Kenmerk Waarde
Body Style Barrel
Output Type PNP-NO
Detection Range 1 mm
Terminal Type Cable
Supply Voltage 10 → 30 V dc
Length 30mm
Width 6.5mm
Maximum DC Voltage 30V
Mounting Type Flush Mount
Switching Current ≤100 mA
IP Rating IP67
Housing Material Metal
Maximum Switching Frequency 3kHz
Maximum Operating Temperature +70°C
Short Circuit Overload Protection Yes
Minimum Operating Temperature -25°C
Shielding Shielded
Reverse Polarity Protection Yes
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
160,75
(excl. BTW)
194,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
160,75 €
Related Products
PBT housing and sensing face. Stock number 405-7167has ...
Description:
PBT housing and sensing face. Stock number 405-7167has a metal housing with duroplast sensing face providing high impact and thermal resistanceAdjustable sensing head, 5 positionsM12 connector termination. Supplied with 2m PUR single-ended, straight connector lead3 wire dcYellow LED output status ...
Stainless steel body with PBT sensing face. Stock ...
Description:
Stainless steel body with PBT sensing face. Stock numbers 405-7072, 405-7094, 405-7101, 405-7117, 405-7123 and 405-7139 have stainless steel bodies and duroplast sensing faces providing high impact and thermal resistance3 wire dc2m PUR prewired and M12 connector versionsConnector versions supplied ...
3-wire flush mounting, stainless steel bodied sensors, protected ...
Description:
3-wire flush mounting, stainless steel bodied sensors, protected to IP67 with an operating temperature range of –25 to +75°C. All have short circuit and reverse polarity protection and provide an LED indication of the on/off status. PUR sensing face500mm Pre-Wired ...
All dc switches in this range have reverse ...
Description:
All dc switches in this range have reverse polarity and short circuit protection. Embeddable versions can be flush mounted in metal. DIN limit switch style housing Sensor head multi-positional relative to baseConnections via terminal compartment4 LEDs indicator for 360° visibility15 ...