Omron Inductive Barrel-Style Proximity Sensor, M18 x 1, 10 mm Detection, PNP Output, 12 → 24 V dc, IP67
- RS-stocknr.:
- 808-6431
- Fabrikantnummer:
- E2E2-X10MB1-M1
- Fabrikant:
- Omron
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 808-6431
- Fabrikantnummer:
- E2E2-X10MB1-M1
- Fabrikant:
- Omron
Datasheets
Wetgeving en conformiteit
Productomschrijving
E2E2 Unshielded DC 3-wire Sensors
This E2E2 range of long-barrel inductive proximity sensors are designed to offer a non contact solution to a wide range of metal sensing applications.
Increased tightening strength
Cable protectors
Increased indicator visibility
Milled section to allow for wrench grip
Unshielded non-flush mountable
DC 3
3-wire output
Thick nickel-plated brass barrel
Cable protectors
Increased indicator visibility
Milled section to allow for wrench grip
Unshielded non-flush mountable
DC 3
3-wire output
Thick nickel-plated brass barrel
Specificaties
Kenmerk | Waarde |
---|---|
Body Style | Barrel |
Thread Size | M18 x 1 |
Sensor Technology | Inductive |
Output Type | PNP |
Detection Range | 10 mm |
Terminal Type | Cable |
Supply Voltage | 12 → 24 V dc |
IP Rating | IP67 |
Length | 65mm |
Maximum DC Voltage | 55V |
Mounting Type | Non-Flush |
Switching Current | 200 mA |
Housing Material | Brass |
Maximum Operating Temperature | +85°C |
Shielding | Unshielded |
Maximum Switching Frequency | 200Hz |
Short Circuit Overload Protection | Yes |
Reverse Polarity Protection | Yes |
Minimum Operating Temperature | -40°C |