Pepperl + Fuchs Inductive Barrel-Style Proximity Sensor, M18 x 1, 12 mm Detection, PNP Output, 10 → 30 V dc, IP67
- RS-stocknr.:
- 800-7567
- Fabrikantnummer:
- NEB12-18GM50-E2-V1
- Fabrikant:
- Pepperl + Fuchs
6 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 127,76
(excl. BTW)
€ 154,59
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 127,76 |
- RS-stocknr.:
- 800-7567
- Fabrikantnummer:
- NEB12-18GM50-E2-V1
- Fabrikant:
- Pepperl + Fuchs
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- CZ
Productomschrijving
Three Wire DC, Flush Mountable Inductive Proximity Sensors with Extended Sensing Distance
This range of inductive proximity sensors from Pepperl + Fuchs are for use where a non-contact solution is needed to detect the presence of metal objects. These sensors are designed into a nickel plated brass housing with a PBT sensing face to ensure a level of robustness whilst offering a lower cost alternative to a stainless steel sensor. Even with this range of inductive proximity sensors from P&F being designed with extended sensing distance they can still be mounted 'virtually flush'.
18 mm diameter, 50 mm long threaded barrel
3 Wire DC output
Pre-wired types have 2m PVC cable
Plug-in types have M12 type connector
3 Wire DC output
Pre-wired types have 2m PVC cable
Plug-in types have M12 type connector
Pepperl + Fuchs
Specificaties
Kenmerk | Waarde |
---|---|
Thread Size | M18 x 1 |
Body Style | Barrel |
Sensor Technology | Inductive |
Output Type | PNP |
Detection Range | 12 mm |
Terminal Type | 4-Pin M12 Connector |
IP Rating | IP67 |
Supply Voltage | 10 → 30 V dc |
Length | 69mm |
Maximum DC Voltage | 30V |
Mounting Type | Flush |
Shielding | Unshielded |
Maximum Operating Temperature | +85°C |
Maximum Switching Frequency | 500Hz |
Housing Material | Brass |
Reverse Polarity Protection | Yes |
Minimum Operating Temperature | -25°C |
Short Circuit Overload Protection | Yes |