Telemecanique Sensors Inductive Block-Style Proximity Sensor, 25 mm Detection, PNP Output, 12 → 24 V dc, IP67

RS-stocknr.:: 444-3170
Fabrikantnummer:: XS8C1A1PAM8
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors Inductive Block-Style Proximity Sensor, 25 mm Detection, PNP Output, 12 → 24 V dc, IP67

Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02/05/2024, met een levertijd van 1 werkdag.

Toegevoegd

Prijs Per stuk

€ 99,40

(excl. BTW)

€ 120,27

(incl. BTW)

Aantal stuks	Per stuk
1 +	€ 99,40

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Telemecanique Sensors Inductive Block-Style Proximity Sensor, 25 mm Detection, PNP Output, 12 → 24 V dc, IP68

RS-stocknr.: 444-3164

Prijs Per stuk

€ 99,40

(excl. BTW)

€ 120,27

(incl. BTW)

RS-stocknr.:: 444-3170
Fabrikantnummer:: XS8C1A1PAM8
Fabrikant:: Telemecanique Sensors

Datasheets

Wetgeving en conformiteit

N.v.t.

Land van herkomst:: FR

Productomschrijving

Telemecanique Inductive Proximity Sensors XS.

Telemecanique Inductive Proximity Sensors XS series allow you to detect all types of objects in all applications providing high detection performance for metal objects. This inductive sensor range with industry recognised high performing technology provide non-contact detection of material up to 20 mm. Inductive proximity sensors are available in flush and non-flush models (shielded and non-shielded).

OsiSense inductive proximity sensors are purely for detecting any metal objects up to 60 mm and include an oscillator with windings (an alternating magnetic field is generated in front) making up the sensing phase.

Styles Available.

Flush and Non-Flush (shielded and non-shielded).

Flat form.

Short and long body.

PNP and NPN versions (compatible with PLCs and controllers).

2 Wire DC, AC or AC/DC versions (available to be installed as a limit switch).

How do they work and where can I use them?

Inductive proximity sensors contain a coil and an oscillator, these create an electromagnetic field close to the sensing surface. When metal enters this field, a change occurs in the oscillating amplitude. This, in turn, changes the sensor output, showing you and equipment that metal has been sensed. Inductive proximity sensors are suitable for use most industries. Inductive sensors are unaffected by oil, dirt or surface finish and can be used in high vibration and high shock areas.

Applications.

Railway. Mobile equipment. Lists and escalators. Hoisting. Material handling, conveying, logistics.

Material working, machine tools. Packaging. Food and beverage. Robotics.

Note

Manufacturers part nos. starting with XS8 indicate teach mode.

XS8C1A1PAM8 General Purpose Inductive Proximity Sensor (XS).

XS8 Inductive Proximity Sensor (part of the OsiSense XS range).

General purpose.

Flat form (block) 40 x 40 x 15.

Size 15 mm.

Fixed body.

Non-Flush mountable.

Plastic body (PBT), PBT front.

Discrete signal, 3-wire.

15 mm flush mountable, 25 mm non-flush mountable (nominal sensing range).

Output 1 NO, DC Circuit (PNP).

Male connector M8, 3 Pins.

[Us] rated supply voltage 12 to 24 V dc (reverse polarity protection).

Height and width 40 mm, Depth 15 mm.

IP67 conforming to IEC 60529.

Vibration resistance to IEC 60068-2-6.

Shock resistance to EN 60068-2-27.

CE marked.

Certificates.

CSA, Ecolab, UL.

Specificaties

Kenmerk	Waarde
Sensor Technology	Inductive
Body Style	Block
Output Type	PNP
Detection Range	25 mm
Terminal Type	3-Pin M8 Connector
IP Rating	IP67
Supply Voltage	12 → 24 V dc
Length	40mm
Width	40mm
Depth	15mm
Maximum DC Voltage	36V
Mounting Type	Non-Flush
Switching Current	200 mA
Maximum Operating Temperature	+70°C
Maximum Switching Frequency	1kHz
Housing Material	PBT
Reverse Polarity Protection	Yes
Minimum Operating Temperature	-25°C
Short Circuit Overload Protection	Yes

RS-stocknr.:: 444-3170
Fabrikantnummer:: XS8C1A1PAM8
Fabrikant:: Telemecanique Sensors