RS PRO Yellow Indicator, 24 V ac/dc, 8mm Mounting Hole Size, Solder Tab Termination, IP67

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS Pro 8mm LED Indicators, IP67

Brought to you by RS Pro, these indicators provide an excellent solution for warning and attention signals within relevant applications. With three colours available, red, yellow and green. A type of traffic light system can be applied to circuit boards or electrical designs in regards to operation or safety. Each LED indicator is rated at IP67, this means it will have great protection and be fully operational within indoor and outdoor applications. All models are highly reliable and excellent quality.

Features and Benefits

• 5 mm high contrast coloured diffused epoxy lens
• Rated at IP67
• Solder tab terminals
• Gold terminals (Anode +ve)
• Various voltage ratings

How protected are these indicators?

Each model has excellent protection, highlighted by their IP67 rating. Although not fully waterproof, every indicator within this range is fully protected from dust and other small particles. It can also be fully immersed in water (up to 1 m depth) for a maximum of 30 minutes. It would depend on the application as to how this feature would be used, but the LED would continue to operate smoothly if the above guidelines are followed correctly.

Why choose LED?

LED has many benefits, the longevity and low power consumption are the main selling points of an LED. However, there are various other reasons to consider:

• Temperature - LED's give off a far cooler temperature than what an incandescent or neon light would.
• Direction - LED's will only emit light in a single direction, reducing the need for additional components, such as reflectors. Although this wouldn't apply if the LED indicator is being used as a circuit board signal.

Do these LED Indicators come with the correct fixings?

Absolutely, each indicator is fully supplied with a fixing nut, washer and a gasket.

Specificaties
Kenmerk Waarde
Voltage Rating 24 V ac/dc
Light Output Colour Yellow
Mounting Hole Size 8mm
Lamp Type LED
Lamp Size 5 mm
Termination Type Solder Tab
IP Rating IP67
Bezel Style Recessed
Bezel Colour Chrome
Current Rating 20 mA
Intensity 40 mcd
Length 41 mm
58 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,48
(excl. BTW)
6,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
5,48 €
15 - 24
4,94 €
25 - 49
4,51 €
50 - 99
3,84 €
100 +
3,29 €
Related Products
10mm coloured diffused round or low profile flat ...
Description:
10mm coloured diffused round or low profile flat lens styles18.3mm Bright Chrome or Black Chrome brass bezelMounting hole size: 16.2mm to 16.4mmSealed to IP67Operating temperature of -25°C to +60°C0.11in. (2.8mm x 0.8mm) terminals.
Finger safe screw terminals standard, other terminal styles ...
Description:
Finger safe screw terminals standard, other terminal styles availableSuper bright incandescent or LED illumination600V/10A contacts with a wide operating range from 5mA at 3V AC/DC to 10A at 120V AC.
5mm coloured diffused epoxy lens9.5mm Bright satin or ...
Description:
5mm coloured diffused epoxy lens9.5mm Bright satin or black chrome brass bezelRecessed or prominent style bezel.
The Idec AP Series of Pilot Lights offer ...
Description:
The Idec AP Series of Pilot Lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cut out diameters, with either dome or flat lenses, all units use an integral LED array with ...