RS PRO Red Indicator, 2 V dc, 8mm Mounting Hole Size, Lead Pins Termination, IP67

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

RS Pro 8 mm LED Indicators Pin Terminals

Brought to you by RS Pro, a high quality range of LED indicators. Each indicator has a compact and durable build, complimented by their IP67 Rating. Pin terminals are attached to the indicators for convenience and easy installation. Whether the application is a signal or warning light, or purely for display purposes, there are various colours to suit your needs. All models are highly reliable and excellent quality.

Features and Benefits

• 5 mm tinted diffused epoxy lens.
• Various voltages
• Recessed or prominent bezel style
• Longevity and low power consumption
• Solder pin terminals

Why choose LED?

Longevity and low power consumption are the main selling points of an LED. However, there are various other reasons to consider:

• Temperature - LED's give off a far cooler temperature than what an incandescent or neon light would.
• Direction - LED's will only emit light in a single direction, reducing the need for additional components, such as reflectors. Although this wouldn't apply if the LED indicator is being used as a circuit board signal.
• Cost - typically as LED's are in a larger supply than standard bulbs or pilot lights, they are a more cost effective solution to purchase, as well as run.

What kind of protection do these indicators have?

Each LED Indicator is rated at IP67. Although not fully waterproof, it is fully protected from dust and other small particles. It can also be fully immersed in water (up to 1 m depth) for a maximum of 30 minutes. It would depend on the application as to how this feature would be used, but the LED would continue to operate smoothly if the above guidelines are followed correctly.

Are there fixings supplied with these indicators?

As standard, each LED indicator is fully supplied with a fixing nut, washer and a gasket. To ensure a quick and easy installation process.

What are the uses of an Indicator?

Uses of indicators fall entirely down to the user. They can be fixed to PCB circuit boards and mounted on push buttons and switches. Primarily, these types of indicators are used within circuit boards and electronic designs. This is due to their relatively small size, as compared with other types of indicators, such as car turn signals.

Please Note

These LED indicators should not be operated without a suitable series resistor or other current-limiting device

Specificaties
Kenmerk Waarde
Voltage Rating 2 V dc
Light Output Colour Red
Mounting Hole Size 8mm
Lamp Type LED
Lamp Size 5 mm
Termination Type Lead Pins
IP Rating IP67
Bezel Style Prominent
Bezel Colour Chrome
Current Rating 20 mA
Intensity 50 mcd
Length 30.5 mm
173 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
803 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,51
(excl. BTW)
3,04
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
2,51 €
15 - 24
2,26 €
25 - 49
2,06 €
50 - 99
1,76 €
100 +
1,51 €
Related Products
Snap-in fixing, requires no additional hardware 5 mm ...
Description:
Snap-in fixing, requires no additional hardware 5 mm tinted diffused epoxy lens Black plastic bezel enhances LED contrast Recessed or prominent style bezel Mounting Hole Size 8mm to 8.2mm diameter Operating Temperature -20 to +60°C.
Brought to you by RS Pro, these indicators ...
Description:
Brought to you by RS Pro, these indicators provide an excellent solution for warning and attention signals within relevant applications. With three colours available, red, yellow and green. A type of traffic light system can be applied to circuit boards ...
Brought to you by RS Pro, these indicators ...
Description:
Brought to you by RS Pro, these indicators provide an excellent solution for warning and attention signals within relevant applications. With three colours available, red, yellow and green. A type of traffic light system can be applied to circuit boards ...
RS 8mm hyper bright panel mount LED indicators ...
Description:
RS 8mm hyper bright panel mount LED indicators with 5mm coloured diffused epoxy lens are available in bright or black chrome bezel finishes. Bezel style options: prominent, recessed and flush. Applications include medical, telecommunications, engineering, transport systems, special vehicles and ...