E10 Panel Mount Indicator Bulb Holder,

  • RS-stocknr. 585-898
  • Fabrikantnummer MTMU/240/4
  • Fabrikant Tranilamp
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Remote Lamp Test

Transformer lampholders designed to provide an output for a 6 V MES filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are designed to be used in conjunction with the 19mm, 19.1mm and 27mm mounting panel Lens/Bezels.

Incorporates a single pole changeover relay and a transformer. Supply voltage 220-240V 50/60Hz.
The remote lamp test facility enables the lamp to be tested without interrupting the normal supply to the transformer, can be initiated via a local or remote push button switch.
Each unit isolates itself from the control circuitry when a test is initiated thereby eliminating any feedback.

Note

A minimum of 30mA per unit is required for the changeover relay to operate the test facility.

//media.rs-online.com/t_line/L585898-02.gif
Specificaties
Kenmerk Waarde
Lampholder Type Panel Mount
Lamp Base E10
Termination Type Cable Clamp
Diameter 35mm
Length 67 mm
Series MTMU
Mounting Type Panel Mount
Voltage Rating 240 V
37 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
22,68
(excl. BTW)
27,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
22,68 €
50 - 99
20,19 €
100 - 249
17,69 €
250 - 499
15,19 €
500 +
13,86 €
Related Products
Brought to you under the trusted RS Pro, ...
Description:
Brought to you under the trusted RS Pro, these LED indicators have diffused epoxy lenses and a chrome bezel. The body features convenient solder lug termination for a quick and easy connection. RS Pro LED indicators give a high level ...
A range of lamp holders and sockets from ...
Description:
A range of lamp holders and sockets from JKL Components, designed for automotive-type LED lamps. They are suitable for use in replacement LED lamp applications. This range of sockets include; wedge based, bi-pin, G-4 and screw based. Available in PCB ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Lampholder moulded from thermoplastic with 20% glass fibre. ...
Description:
Lampholder moulded from thermoplastic with 20% glass fibre. Designed for circuit board mounting contact is made to both sides of the circuit board via the lugs (for circuit board thickness 1.5mm ± 0.1mm).