LED Indicator Bulb Holder,

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

LED Indicator, 12 & 24Vdc, Black Chrome Bezel

Brought to you under the trusted RS Pro, these LED indicators have diffused epoxy lenses and a chrome bezel. The body features convenient solder lug termination for a quick and easy connection. RS Pro LED indicators give a high level of brightness and a long life at low energy consumption, making them ideal for a variety of equipment applications.

• 5mm coloured diffused epoxy lens
• Length: 37mm
• Life Expectancy: 100000 Hours
• Operating Temperature range: -25 to +75°C
• Tri-colour variants contain a red LED and a green LED, when both are on yellow is produced
• 0.11in. (2.8 x 0.8) terminals, except for tri-colour variants which have 2 x 0.5mm
• Gold faston terminal denotes Anode (+), Silver terminal denotes cathode (-)

Supplied with

fixing nut and washer

Specificaties
Kenmerk Waarde
Lamp Type LED
Diameter 11mm
Length 21 mm
645 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
0,55
(excl. BTW)
0,67
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 120
0,55 €
2,75 €
125 - 245
0,478 €
2,39 €
250 - 495
0,408 €
2,04 €
500 - 1245
0,334 €
1,67 €
1250 +
0,264 €
1,32 €
*prijsindicatie
Related Products
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES/MBC filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
Lampholder moulded from thermoplastic with 20% glass fibre. ...
Description:
Lampholder moulded from thermoplastic with 20% glass fibre. Designed for circuit board mounting contact is made to both sides of the circuit board via the lugs (for circuit board thickness 1.5mm ± 0.1mm).
The nickel plated brass body is supplied with ...
Description:
The nickel plated brass body is supplied with an insulation washer, solder tag, fixing nut and washer. Electrical connections are made via the solder tag and body return.,The caps incorporate a nickel plated brass screw with polycarbonate fresnel lens. The ...