ITT Cannon Speedy D Series 1.27mm Pitch 15 Way IDC D-Sub Ribbon Cable Connector, Plug, Steel Shell

  • RS-stocknr. 437-310
  • Fabrikantnummer DASF-15P-K87
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

Sub-Miniature D-Type IDC Connectors

These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly.

No cable stripping, soldering or expensive tooling is required
Fully compatible with conventional D connectors and accepts all standard locking systems
Low profile, robust cadmium plated steel shells with black thermoplastic housings fitted with gold plated contacts on a 1.27mm pitch
Can be daisy chained if required
Dims assembled (mm): Width 13, Depth 17 Ways/Length 15//39, 25//53, 37//69

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 15
Body Orientation Right Angle
Pitch 1.27mm
Contact Material Copper Alloy
Contact Plating Gold over Nickel
Housing Material Steel
Current Rating 1.5A
Voltage Rating 780 V ac
Dimensions 39.1 x 16.2 x 12.9mm
Series Speedy D
Depth 12.9mm
Length 39.1mm
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Width 16.2mm
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
156 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,04
(excl. BTW)
10,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
9,04 €
20 - 39
8,13 €
40 +
7,32 €
Verpakkingsopties
Related Products
PCI PCB mount card edge connectors with a ...
Description:
PCI PCB mount card edge connectors with a 1.27mm pitch. These PCI PCB mount card edge connectors are available with a 32 bit or 64 bit (stock numbers 745-5703 and 864-3829) bus width and are made from white thermoplastic with ...
Low profile connectors with bright tin finish and ...
Description:
Low profile connectors with bright tin finish and grounding indents for EMI/RFI protection. Provides high speed mass termination onto flat ribbon cable (26-28awg wire)Contact rating 1A, contact resistance 15mΩComplies with BS9523 & MIL–C–24308 size With strain relief clamp.
Cable mounting D connectors designed for Class II ...
Description:
Cable mounting D connectors designed for Class II performanceTin plated with dimples for good groundingFor tooling see stock nos. 120-6962 and 192-7748These connectors are particularly suitable for use with the 3M colour-coded ribbon cable stock no. 120-8485Strain Relief has to ...
Cable mounting D connectors designed for Class II ...
Description:
Cable mounting D connectors designed for Class II performanceTin plated with dimples for good groundingFor tooling see stock nos. 120-6962 and 192-7748These connectors are particularly suitable for use with the 3M colour-coded ribbon cable stock no. 120-8485Strain Relief has to ...