Microchip Technology MCP23S17T-E/SO, 16-Channel I/O Expander 10MHz, SPI, 28-Pin SOIC

  • RS-stocknr. 177-3101
  • Fabrikantnummer MCP23S17T-E/SO
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

The MCP23017/MCP23S17 (MCP23X17) device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface.MCP23017 – I2C interface MCP23S17 – SPI interfaceThe MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits (IODIRA/B). The data for each input or output is kept in the corresponding input or output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

16-bit input/output port expander with interrupt outputCascadable for up to 8 devices on one bus25mA sink/source capability per I/OSupports up to 10MHz SPI™ clock speeds

Specificaties
Kenmerk Waarde
Number of I/O Channels 16
Interface SPI
Number of Pins 28
Package Type SOIC
Clock Frequency 10MHz
Mounting Type Surface Mount
Maximum Supply Voltage 5.5 V
Minimum Supply Voltage 1.8 V
50 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
1,012
(excl. BTW)
1,225
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 20
1,012 €
10,12 €
30 +
0,986 €
9,86 €
*prijsindicatie
Verpakkingsopties
Related Products
The MCP25625 is a complete, cost-effective and small-footprint ...
Description:
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters ...
The ENC28J60 from Microchip is a great stand-alone ...
Description:
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a ...
The Microchip MTCH652 is a Driver IC designed ...
Description:
The Microchip MTCH652 is a Driver IC designed to drive High-Voltage Outputs in Capacitive Touch applications. The MTCH652 combines a Boost Converter with 19 Level Shifters to drive up to 19 channels.The device is programmable via a Configuration (CONFIG) registers. ...
The MCP23X17 consists of multiple 8-bit configuration registers ...
Description:
The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits (IODIRA/B). The data for each input or output ...