Bosch Rexroth Hydraulic Pump Flange R900321448

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Self Aspirating External Gear Pump, 1:5 Tapered Shaft

Plain bearings cater for high load applications
To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern
Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut

Note

Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B10≥100.

Supplied with

Instruction leaflet.

//media.rs-online.com/t_line/L728758-01.gif
//media.rs-online.com/t_line/L728764-01.gif
//media.rs-online.com/t_line/L728770-01.gif
//media.rs-online.com/t_line/LD728758-01.gif
//media.rs-online.com/t_line/LD728764-01.gif
//media.rs-online.com/t_line/LD728770-01.gif

Gear Pumps

Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.

Specificaties
Kenmerk Waarde
Manufacturer Series AZP
Tube Outside Diameter 20mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14/07/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
46,40
(excl. BTW)
56,14
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
46,40 €
5 - 9
44,98 €
10 +
43,53 €
Related Products
Direction of rotation is clockwise. Nominal displacement is ...
Description:
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s ...