Parker UCC Hydraulic Level & Temperature Gauge FL.69321

  • RS-stocknr. 196-2763
  • Fabrikantnummer FL.69321
  • Fabrikant Parker
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Level and Temperature Gauge

Designed to add style and efficiency to tank installations. These fluid level temperature gauges have a co-ordinated design with modular air breathers. The gauges are compatible with mineral and petroleum-based fluids due to their construction from high strength, aluminium free materials.

Features and Benefits

• High visibility one piece polyamide lens
• Universal front or rear fixing
• M10 and M12 bolt thread options
• 3 sizes with or without thermometer – 76 mm, 127 mm and 254 mm
• High impact polystyrene shroud
• For use on pressurised tanks up to 1 bar

Product and Application Information

Simple to install and designed for either front or rear fixing. After positioning the gauge, the bolts are tightened to provide a secure seal with no fear of leaking.

Supplied with

gasket

//media.rs-online.com/t_line/L331953-02.gif
//media.rs-online.com/t_line/LD196273-01.gif
//media.rs-online.com/t_line/LF196273-02.gif
//media.rs-online.com/t_line/LI196273-01.gif
Specificaties
Kenmerk Waarde
Scale Length 254mm
Maximum Operating Pressure 1 bar
Minimum Operating Temperature -30°C
Maximum Operating Temperature +90°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/12/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
26,63
(excl. BTW)
32,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
26,63 €
5 - 9
25,82 €
10 +
24,97 €
Related Products
Forming part of Druck’s PTX 600 series, this ...
Description:
Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been ...
The Volkel Go No-Go plug gauge M18x2.5 is ...
Description:
The Volkel Go No-Go plug gauge M18x2.5 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel Go No-Go plug gauge M14x2 is ...
Description:
The Volkel Go No-Go plug gauge M14x2 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...
The Volkel Go No-Go Plug Gauge M5x0.8 is ...
Description:
The Volkel Go No-Go Plug Gauge M5x0.8 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more ...