527mm Synthetic Rubber Hydraulic Hose Assembly, 215 bar Max Pressure, -40 → +100°C

  • RS-stocknr. 448-6701
  • Fabrikantnummer 448-6701
  • Fabrikant Parker
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Straight / 90° Elbow Assembly

High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp is affected by the bite of the serrations in the sleeve on to the hose reinforcement. The reinforcing braid is protected by the external rubber cover, which makes the fitting and hose assembly leak tight. This feature guarantees corrosion protection of the reinforcement and so prolongs the life of the assembly. For further confidence every assembly is proof pressure tested to twice working pressure. Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water. Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel. Manufacturer’s hose type is Parker Type 301 No Skive Hose, with a BSP Straight Swivel Female Each End. Temperature range is -40 to +100°C. All finished assemblies proof pressure tested to twice maximum working pressure. Temperature range -40 to +100°C.

Note

These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi).

Standards

DIN 20022 2SN, EN853-2SN, SAE 100R2 AT

//media.rs-online.com/t_line/L396525-01.gif

Standards

DIN 20022 2SN; EN853-2SN; SAE 100R2 AT; ISO 1307

Warning

  • Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.
Specificaties
Kenmerk Waarde
Overall Length 527mm
Inside Diameter 3/4in
Connector A Straight G 3/4 Female
Connector B 90° Elbow G 3/4 Female
Inner Hose Material Synthetic Rubber
Reinforcing Material Steel
Cover Material Synthetic Rubber
Maximum Operating Pressure 215 bar
Connector B - Thread Standard G
Connector A - Angle Straight
Connector B - Thread Size 3/4in
Connector A - Thread Standard G
Connector B - Gender Female
Connector A - Gender Female
Minimum Operating Temperature -40°C
Connector A - Thread Size 3/4in
Connector B - Angle 90° Elbow
Maximum Operating Temperature +100°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
41,09
(excl. BTW)
49,72
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
41,09 €
5 - 9
39,83 €
10 +
38,54 €
Related Products
Portable (18kg), compact (688mm tall x 305mm deep) ...
Description:
Portable (18kg), compact (688mm tall x 305mm deep) and ruggedly built pressComes equipped with die ring suitable for all sizes of hoseColour-coded die train set required for each different size of hoseHigh pressure hydraulic pump and hose link required to ...
Themo plastic hydraulic hoses for use in demanding ...
Description:
Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design ...
High quality thermoplastic hydraulic hoses, that are suitable ...
Description:
High quality thermoplastic hydraulic hoses, that are suitable for use with our range of hydraulic hand pumps, and high pressure cylinders, when assembling a system for various pushing, pulling, positioning and lifting applications.All hoses come supplied with 3/8" - 18NPT ...
High-quality flexible hydraulic hose assemblies with crimped end ...
Description:
High-quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fitting (which eliminates an incorrectly matched insert and sleeve) and matching hoses.Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel ...