SKF 729124, Hydraulic Hand Pump, 250cm3, 100 MPa

  • RS-stocknr. 124-8434
  • Fabrikantnummer 729124
  • Fabrikant SKF
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

SKF Hydraulic Pump

SKF Hydraulic Pump 728619 E

The SKF 728619 E is a two stage pump suitable for mounting bearings or components with a maximum pressure of 150 MPa.

Features and Benefits

• Oil container capacity 2550 cm³
• Two stage pressure pumping
• Fitted with pressure gauge and supplied with a sturdy case

Product Application Information

Can be used with SKF Supergrip Bolts and all sizes of SKF hydraulic nuts.

SKF Hydraulic Pump 729124

The SKF 729124 has been designed for use with SKF Hydraulic Nuts to mount bearings or components with a maximum pressure of 100 MPa.

Features and Benefits

• Oil container capacity 250 cm³
• Fitted with pressure gauge and supplied with a sturdy case

Product Application Information

Can be used with SKF Hydraulic Nuts. Ideal for use where space does not allow the use of quick connection.

Note

All SKF Hydraulic Pumps are filled with SKF Mounting Fluid LHMF 300 and are supplied with an extra litre of fluid

Oil Injection Kits

Specificaties
Kenmerk Waarde
Usable Oil Capacity 250cm³
Displacement per Stroke 1st Stage 0.5cm³
Maximum Operating Pressure 100 MPa
Weight 3.5kg
Operation Hand Operated
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.141,83
(excl. BTW)
1.381,61
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.141,83 €
Related Products
Direction of rotation is clockwise. Nominal displacement is ...
Description:
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s ...
Piston-type hand pumps offer completely self-contained units for ...
Description:
Piston-type hand pumps offer completely self-contained units for instant operation. Each pump consists of a pre-filled oil reservoir, pump head with external load release valve, and an operating lever. The two-speed model HP227 (807-895) enables rapid cylinder rod advancement until ...
Portable (18kg), compact (688mm tall x 305mm deep) ...
Description:
Portable (18kg), compact (688mm tall x 305mm deep) and ruggedly built pressComes equipped with die ring suitable for all sizes of hoseColour-coded die train set required for each different size of hoseHigh pressure hydraulic pump and hose link required to ...
Hand operated hydraulic pumps and pump sets with ...
Description:
Hand operated hydraulic pumps and pump sets with a maximum working pressure of 700 bar. The pumps hydraulic outlet port thread size is 3/8in x 18NPT. The two speed model is recommended for applications where cylinder pistons must advance rapidly ...