Elesa-Clayton Hydraulic Breather Cap 56241, G 3/4" , 57mm diameter

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Standard

Oil breather caps manufactured from a polyamide-based technopolymer with a synthetic rubber packing ring. These breather caps are the ideal choice where a rapid change in liquid volume can be expected such as hydraulic power packs and oil tanks. Resistant to various oils, greases and solvents.

//media.rs-online.com/t_line/L364129-01.gif
Specificaties
Kenmerk Waarde
Connection Thread G 3/4
Cap Diameter 57mm
Colour Orange
Cap Material Polyamide
Finish Semi Matte
Maximum Operating Temperature +100°C
Thread Size 3/4in
Thread Standard G
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
5,69
(excl. BTW)
6,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
5,69 €
5 - 9
5,46 €
10 - 24
5,36 €
25 +
5,23 €
Related Products
Cap allows the movement of air through the ...
Description:
Cap allows the movement of air through the cap filter element, thus preventing dust from being drawn into the reservoir as the fluid level fluctuates. • Suitable for use with mineral oils• Maximum flow rate 455 L/min• 70 μm filter• ...
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...
The IP65 rated range of moulded, non-corrodible, glass ...
Description:
The IP65 rated range of moulded, non-corrodible, glass filled nylon air breathers combine strength with a lightweight design. These screw-on type air breathers are non-pressurised and are a proven range of quality reservoir solutions. • Mouldings in glass filled nylon ...
These screw-on type air breathers from Parker combine ...
Description:
These screw-on type air breathers from Parker combine strength with a lightweight design. • Moulded in non-corrodible glass filled nylon• Expanded polyurethane foam filtration element• Nitrile seals• -30°C to 90°C working temperature• G1/2 or G3/4 thread• 0.2Kg breather weight• ...