Muller Hour Counter, 6 digits, Screw Connection, 24 V ac

  • RS-stocknr. 861-9857
  • Fabrikantnummer BW 70.89 24V
  • Fabrikant Muller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

BW70.89 - Elapsed Time Counter, Double Module Wide

Elapsed Time Counter BW70.89 for DIN rail mounting


Elapsed time counter
Counter capacity 99.999 h
White numeral colour, decimal figure red
Non-resettable
Operation indicator with flashing LED
Flush mount dimensions 45 x 35 mm
With terminal cover
Screw terminals (pull-up type)
Touch proof connections
IP50 protection
DIN-rail mounting

//media.rs-online.com/t_line/L208034-01.gif
//media.rs-online.com/t_line/L331130-02.gif
Specificaties
Kenmerk Waarde
Connection Type Screw
Input Type Voltage
Count Capacity 99999
Reset Method No Reset
Supply Voltage 24 V ac
Number of Digits 6
Minimum Operating Temperature -15°C
Mounting Type DIN Rail
Maximum Operating Temperature +55°C
Series BW70
29 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
19,77
(excl. BTW)
23,92
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
19,77 €
5 - 9
19,18 €
10 +
18,73 €
Related Products
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Programmable with microprocessors, comprising a general totaliser, a ...
Description:
Programmable with microprocessors, comprising a general totaliser, a counter with 2 presets, single preset counter programmable as a tachometer, & an hour meterprogrammable scaling and reset modesLED DisplayProgrammable zero shift and permanent display of the programmed parameterOperating temperature 0 to ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...