Linear Technology LT4356MPS-1#PBF, Hot Swap Controller, 12 V 16-Pin, SOIC

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Surge Stopper Circuits, Linear Technology

Linear Technology high voltage Surge Stopper devices for the protection of loads from over-voltage and high voltage transient damage. These products will find uses in a variety of applications, such as automotive, avionic, and industrial Surge Protection, Hot Swap™ and Live Insertion systems, High Side Switching for battery-powered systems and safety applications.

Surge Protection and Clamping Circuits

Integrated circuit solutions to facilitate transient surge and over-voltage protection in a wide range of applications.

Specificaties
Kenmerk Waarde
Hot Swap Controller Type Positive Voltage
Typical Operating Supply Voltage 12 V
Number of Channels 1
External Sense Resistor Yes
External FET N-Channel
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Fault Management Latched Off
Dimensions 10 x 4 x 1.5mm
Height 1.5mm
Length 10mm
Width 4mm
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -55 °C
103 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
12,66
(excl. BTW)
15,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
12,66 €
10 - 24
12,03 €
25 +
8,40 €
Verpakkingsopties
Related Products
The GSM18E is complying with international medical safety ...
Description:
The GSM18E is complying with international medical safety regulations, these plug in power supplies also possess a low leakage current ˂50 μA and low no load power consumption ˂0.1W, which can fulfil the demands of “patient contact” medical applications. The ...
The Microchip MCP2551 is a high-speed CAN Transceiver ...
Description:
The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is ...
The HT12E/D chipset works with an Ir or ...
Description:
The HT12E/D chipset works with an Ir or RF transmitter and receiver device to make a 4-button wireless remote control system. 8-bit ID (Address) code set by switchesEncoder sends packet containing ID code and button-pressed data four times on serial ...
The HT12E/D chipset works with an Ir or ...
Description:
The HT12E/D chipset works with an Ir or RF transmitter and receiver device to make a 4-button wireless remote control system. 8-bit ID (Address) code set by switchesEncoder sends packet containing ID code and button-pressed data four times on serial ...