Linear Technology LTC1422IS8#PBF, Hot Swap Controller, 2.7 → 12 V 8-Pin, SSOP

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Hot Swap Controllers, Linear Technology

Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, control and operate continuously as the boards are hot plugged in or pulled out. They can present board power monitoring via digital measurements of the current and voltage levels by integrated ADCs, accessible through I2C/SMBus interfaces. Linear Technology’s Hot Swap controllers utilise N-channel MOSFETs to control power flow, which allows a wide range of load currents and operating voltages.

These devices are often used in applications such as:
Server rack mount systems
Distributed power systems
Medical Systems, Telecom systems
Set Top Boxes
High side switch/circuit breakers
Switchers / Routers

Monitor, Control and Protection, Linear Technology

Specificaties
Kenmerk Waarde
Hot Swap Controller Type Positive Voltage
Typical Operating Supply Voltage 2.7 → 12 V
Number of Channels 1
Typical Circuit Breaker Threshold Voltage 50mV
External Sense Resistor Yes
External FET Yes
PGOOD Output Logic Yes
Mounting Type Surface Mount
Package Type SSOP
Pin Count 8
Fault Management Latched Off
Dimensions 5.004 x 3.988 x 1.498mm
Height 1.498mm
Length 5mm
Width 3.988mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (In a Tube of 100)
5,941
(excl. BTW)
7,189
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
100 - 200
5,941 €
594,10 €
300 +
5,465 €
546,50 €
*prijsindicatie
Related Products
Linear Technology created a wide range of battery ...
Description:
Linear Technology created a wide range of battery charger IC offered in linear or switching topologies. They are suitable for any rechargeable battery chemistry this includes Lithium-Ion (Li-Ion), as well as Nickel Cadmium (NiCD) and Nickel metal hydride (NiMH). LTC ...
Linear Technology high voltage Surge Stopper devices for ...
Description:
Linear Technology high voltage Surge Stopper devices for the protection of loads from over-voltage and high voltage transient damage. These products will find uses in a variety of applications, such as automotive, avionic, and industrial Surge Protection, Hot Swap™ and ...
This family of load and power switches from ...
Description:
This family of load and power switches from Analog Devices are highly integrated devices. They are designed to switch voltage rails controlled through an internal high-side switch. This range of load switches also features over-temperature and over-current protection options. Suitable ...
Wide Input Supply: −36 V to −80 VTransient ...
Description:
Wide Input Supply: −36 V to −80 VTransient Rating to −100 VImproved Transient ResponseΕnable Input (EN)Programmable Current LimitProgrammable Current Slew RateFault Timer to Eliminate Nuisance TripsOpen−Drain Power Good Output (/PG)Wide input voltage rangeWithstand input voltage spikes to −100 VInput current ...