TC 236 Safety Hinge Switch, NO/NC, M20 x 1.5

  • RS-stocknr. 193-5777
  • Fabrikantnummer T4C 236-11Z
  • Fabrikant Schmersal
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

T.C 236, Hinge Slider

These switches are designed for hinged guards and have a built-in actuator lever which operates the contact block with a positive mechanical linkage
N/C safety contact positively disconnected after just 4.5° rotation
Head can be turned in any one of four 90° positions
Slow action contact system
The housing with snap-on cover fastened without screws to facilitate easy connection

Note

It is important to select the correct lever model dependent upon the position of the hinge on the guard

Standards

IEC947-5-1/EN60947-5-1/DIN VDE 0660 Part 200; BG-GS-ET-15; DIN EN 50047; BS5304

//media.rs-online.com/t_line/L193576-02.gif
//media.rs-online.com/t_line/LD193576-02.gif

Hinge Switch

Specificaties
Kenmerk Waarde
Series TC 236
Lock Style Hinge
Normal State Configuration NO/NC
Maximum Current 4 A
Maximum AC Voltage 230V
Maximum DC Voltage 24V
Number of Cable Entries 1
Size of Cable Entries M20 x 1.5
Conduit Entry M20
Shaft Length 70mm
Trigger Angle Range 12.5°
Minimum Operating Temperature -30°C
Maximum Operating Temperature +80°C
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 64,47 €
58,59
(excl. BTW)
70,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
58,59 €
10 - 14
56,21 €
15 +
53,77 €
Related Products
Insulation encapsulatedOperation via axis of rotationFor mounting on ...
Description:
Insulation encapsulatedOperation via axis of rotationFor mounting on hinge axesFor monitoring rotatable and pivotable safety equipmentSwitch casing in accordance with EN 50047Protection rating IP 65.
Introducing the XCS PL series. Ideal for light ...
Description:
Introducing the XCS PL series. Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards2 outputs5° displaced tripping angle4 position turret headIngress protection; IP67Slow break safety contacts with positive opening ...
A miniature hinge operated safety interlock switch with ...
Description:
A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and ...
Hinge switch for right-side mountingPivot angle 0° → ...
Description:
Hinge switch for right-side mountingPivot angle 0° → 270°Freely adjustable switch pointIntegrated fine adjustment system makes readjusting easy even after the switch point has been setSwitch point can be reset with a change kitWired or plugged connectionAxial or radial connection ...