Facom Hex Key 2.5mm

  • RS-stocknr. 755-4125
  • Fabrikantnummer 84TZ.2.5
  • Fabrikant Facom
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Facom Standard T Handle Hex Key

Introducing Facoms T handle hex key. The ergonomic design of the handle allows for the tool to be multifunctional by allowing users to access both ends of the key. The T handle also offers a sturdy grip and comfort and designed for high torque speeds. These hexagon keys are used for the removal and tightening of fasteners and sockets.

This range includes the following sizes (Metric)
755-4125 - 2.5mm
755-4129 - 3mm
794-7830 - 6mm

Features and Benefits:

Material - comprised of silicone steel, a hard-wearing material that ensures optimal strength and a long tool shelf life
Make use of both ends of the hex key
High quality, T shaped hex plus keys
The hex key features a phosphate coated finish
Metric

Typical Applications

Hex keys and bit sets are used by:
Plumbers
Electricians
Mechanics
Electronic Engineers

Did you know?
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.

Also, a hex key can be reconditioned using an electrical grinder, or similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.

Note

84TZ range have a straight standard end
84TZS range have a spherical end

Specificaties
Kenmerk Waarde
Number of Pieces 1
Shape T
Short or Long Arm Long
Material Silicon Steel
Finish Phosphate
Imperial or Metric Metric
Hex Key Size 2.5mm
Hex Key Type Hexagon
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
246 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,81
(excl. BTW)
5,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
4,81 €
Related Products
13 Piece - Imperial Ball End L-Wrench Set ...
Description:
13 Piece - Imperial Ball End L-Wrench Set with ColorGuard Finish. •Extra Long Arm•Set Includes sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8-inch - Multicoloured•Lifetime warranty•Made in USA.
13 Piece - Imperial Balldriver L- wrenches with ...
Description:
13 Piece - Imperial Balldriver L- wrenches with GoldGuard Finish, Long Length, sizes .050-3/8-Inch. •Angle entry up to 25 degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8"•The Balldriver® L- wrench saves ...
6 Piece - Imperial Balldriver Set with T-Handle ...
Description:
6 Piece - Imperial Balldriver Set with T-Handle Set, sizes 5/32-3/8-Inch. •Angle entry up to 25 degrees on sizes 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8"•Cushion grip T-handle is ergonomically shaped to reduce pressure points during continuous use•ProGuard Finish is ...
Angled box wrenches: allows to work on long ...
Description:
Angled box wrenches: allows to work on long threaded rods.Passage hole allowing to use shanks: 160A.Shank to use: 160A.1 for the dimensions 4 to 23 mm, 160A.2 for the dimensions 24 to 32 mm.Metric sizes: 4 to 32 mm.Presentation: satin ...