H-BE Series Connector Housing, 108 (H-DD), 24 (H-BE) Way

  • RS-stocknr. 448-862
  • Fabrikantnummer 10104000+12954500
  • Fabrikant Epic Contact
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

H-BE/H-DD Connector Housings

From Contact Connectors, these connector housings are for use with Contact Epic H-BE and H-DD connector inserts. The housings have integrated locking levers to connect securely to corresponding connector hood pips.

The housings are available in surface mount and panel mount versions. Surface mount housings allow direct mounting to the panel with no special panel cut out required. Panel mount housings require panel cut out to all cable feed through

Available in this Range

• Stock No. 448-834 is a H-BE 6/H-DD 24 way connector housing
• Stock No. 448-840 is a H-BE 10/H-DD 42 way connector housing
• Stock No. 448-856 is a H-BE 16/H-DD 72 way connector housing
• Stock No. 448-862 is a H-BE 24/H-DD 108 way connector housing
• Stock No. 448-799 is a H-BE 6/H-DD 24 way IP65 connector housing
• Stock No. 448-806 is a H-BE10/HDD 42 way standard height connector housing
• Stock No. 448-812 is a H-BE 16/H-DD 72 way connector housing
• Stock No. 448-828 is a H-BE 24/HDD108 way standard height connector housing
• Stock No. 298-5284 is a H-BE 6/H-DD 24 way IP65 connector housing
• Stock No. 298-5307 is a H-BE16/H-DD 72way IP65 connector housing

//media.rs-online.com/t_line/L482749-02.gif
//media.rs-online.com/t_line/L486690-04.gif

H-BE / H-DD Hoods & Housings

HBE connectors are type tested to 16A, 440Vac, and are available complete in kit form and as individual parts.

Aluminium alloy construction
Metric versions also available
High construction versions allow the use of bulky multicore cable and are ideally suited for use with the high density H-DD inserts

These hoods and housings will accept either plug or socket inserts from the H-BE 440Vac 16A screw termination inserts, or the H-DD 250Vac 10A high density crimp termination inserts.
The cable glands seal to IP65. Panel mount bases include a rubber gasket for sealing.
All this allows for a wide variety of commercial and industrial applications.

Specificaties
Kenmerk Waarde
Type Connector Housing
Number of Contacts 24 (H-BE), 108 (H-DD)
Series H-BE
Thread Size PG21
Pole Format 24P+E, 108P+E
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
43 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
27,61
(excl. BTW)
33,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
27,61 €
10 - 24
26,51 €
25 - 49
25,40 €
50 +
24,30 €
Related Products
These hoods and housings are based on the ...
Description:
These hoods and housings are based on the well proven Han B standard hoods and housings with identical dimensions and panel cut outs. The electrical contact between hood and housing is achieved by means of a metal adaptor frame. This ...
From EDAC, these covers are for use with ...
Description:
From EDAC, these covers are for use with 516 series rack and panel connectors. The robust metal covers are side entry and are supplied without mounting screws, which are available separately. Metal covers and mounting screw sets.Set 1 - For ...
Male and female inserts will fit either cable ...
Description:
Male and female inserts will fit either cable hood housings or base housings. The insrts is supplied without contacts. Each insert has a separate earth contact.,If 32 way connectors are required both the 1-16 pole (16 way) and 17-32 pole ...
From Contact Connectors, this hood and cable gland ...
Description:
From Contact Connectors, this hood and cable gland kit is for use with Contact Epic H-BE and H-DD connector inserts. The hoods have integrated pips to connect securely to corresponding connector housing levers. • Stock No.448-698 is a H-BE 6/H-DD ...