Danfoss Thermostats with Auto Mode, LCD Display, Manual Override, 24 h, +5 → +30 °C

  • RS-stocknr. 418-9444
  • Fabrikantnummer TP5000 - 087N7910
  • Fabrikant Danfoss
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

TP5000Si 5+2 day

Battery powered electronic programmable room thermostat offering up to six time and temperature changes per day.With built-in sensor and service interval timer.

Easy to program and clock is factory set
Large, easy-to-read display showing time and target temperature
Up to 6 time/temperature settings per day
Built-in sensor and service interval timer
Manual over ride possible
Frost protection mode (fixed at 5°C)
Powered by 2 AA batteries with capacitor backup when changing

Specificaties
Kenmerk Waarde
Program Duration 24 h
Additional Features Auto Mode, LCD Display, Manual Override
Contact Rating 1A
Contact Voltage 10 → 230 V ac
Switch Configuration SPDT
Maximum Temperature +30 °C
Minimum Temperature +5 °C
Temperature Range +5 → +30 °C
33 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
90,95
(excl. BTW)
110,05
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
90,95 €
10 - 24
86,40 €
25 +
81,85 €
Related Products
Two electronic central heating programmers for use with ...
Description:
Two electronic central heating programmers for use with fully pumped or gravity primary systems which have separate heating and hot water control. 7 day or 24 hour versions availableManual control, 1 or 2 On/Off periods per day with an advanceIntegral ...
A 2 or 3-channel 7 day electronic programmer ...
Description:
A 2 or 3-channel 7 day electronic programmer for fully pumped or gravity systems providing independent control of heating and hot water. True 7-day programmingLarge display of operational statusBoth units fit a British gas standard fixing plateOne touch day copy ...
With an electronic sensing element for accurate temperature ...
Description:
With an electronic sensing element for accurate temperature controlRetains the traditional analogue dial and overall sizeSuitable for surface or conduit box mountingThermostat clips onto a backplate for easy, neat installationLarge dial for accurate settingRange limiting stops which can also provide ...
The TH-0471 single channel electronic programmer is designed ...
Description:
The TH-0471 single channel electronic programmer is designed primarily for control of a single heating zone or combi-boiler application. Individual days or 5 day / 2 day groups selectableIndependent 7 day switchingUnique frost protection facilityBackup battery type - 3V lithium ...