Ceramic Heating Element, 400mm, 200 W, 230 V ac

  • RS-stocknr. 374-3132
  • Fabrikantnummer RCF/TC 200
  • Fabrikant Acim Jouanin
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Approvals

UL Recognised; CSA Certified

Warning

  • For reasons of safety the heater block and/or heater sheath must be bonded to earth
Specificaties
Kenmerk Waarde
Heating Element Form Insulated Strip
Power Rating 200 W
Supply Voltage 230 V ac
Length 400mm
Width 3.7mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/11/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
147,81
(excl. BTW)
178,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
147,81 €
5 - 9
143,38 €
10 +
137,47 €
Related Products
These heating elements are extremely energy efficient converting ...
Description:
These heating elements are extremely energy efficient converting 96% of the input power to heat with a maximum temperature of 700ºC. 5000 - 10,000 hours working life Available in two sizes and with or without integral type K thermocouple for ...
Strip and finned strip heaters are a versatile ...
Description:
Strip and finned strip heaters are a versatile and economical heating source for various applications. The fins on the finned strip heaters, heat transfer in free or forced air heating applications. Made of specially selected high grade materials, including high ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Self regulating PTC heaterProtection Class IILead wire silicone, UL 3135, white, AWG20, Length = 100±5mmTermination 6mm splice crimp. ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. 230V ac supply voltage Two M5 x 30mm mounting bolts on the rear7mm leadsSuitable for medium wave infrared ...