- RS-stocknr.:
- 106-5427
- Fabrikant:
- RS PRO
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 159,61
(excl. BTW)
€ 193,13
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 159,61 |
- RS-stocknr.:
- 106-5427
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- GB
Productomschrijving
3D Printer Heater Mats
Silicone heater mat technology delivers improved 3D Printer quality and speed of process. The heater mans are thin and lightweight and have a low thermal mass. Due to this low mass, the mats have rapid heat up characteristics and fast response to temperature control. The 3D heater mats wide operating temperature range, flexibility and superb electrical properties give it a distinct advantage over other forms of heating.
Within the heated build platform (HBP) of a 3D Printer, printing quality is improved by having the platform accurately and uniformly heated. As extruded plastic cools it shrinks slightly, when this shrinking process occurs unevenly the printed component can result in warped parts.
Within the heated build platform (HBP) of a 3D Printer, printing quality is improved by having the platform accurately and uniformly heated. As extruded plastic cools it shrinks slightly, when this shrinking process occurs unevenly the printed component can result in warped parts.
Features and Benefits
Designed to suit common 3D Printer flat bed
Backing adhesive from Nitto, no loss in performance
Etched Foil heating elements
Operating temperature +180°C (intermittent maximum due to adhesive) 150°C continuous use
Consistent and even temperatures eliminate quality concerns
All units supplied with instruction leaflet
PTFE braided thermocouple type J incorporated offering universal controllability
Backing adhesive from Nitto, no loss in performance
Etched Foil heating elements
Operating temperature +180°C (intermittent maximum due to adhesive) 150°C continuous use
Consistent and even temperatures eliminate quality concerns
All units supplied with instruction leaflet
PTFE braided thermocouple type J incorporated offering universal controllability
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Specificaties
Kenmerk | Waarde |
---|---|
Mat Shape | Square |
Power Rating | 176 W |
Rectangular Mat Size | 200 x 200mm |
Peak Temperature | +180°C |
Supply Voltage | 240 V ac |
Dimensions | 200 x 200 mm |