TE Connectivity Black No 4:1, Heat Shrink Tubing 32mm Sleeve Dia. x 1.2m Length , ATUM Series

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CZ
Productomschrijving

ATUM - Moisture Proof Sleeving 3:1 or 4:1

The ATUM range of heat shrink tubing has been specifically designed to provide environmental sealing and protection in a wide variety of electrical applications and is suitable for both commercial and military use. The tubing has an internal adhesive lining that when heated forms a moisture proof seal that bonds to a wide variety of materials. The high expansion ratio makes it possible to repair most damaged cables without the need to remove any connectors.

Features and Benefits

• Provides excellent environmental sealing for electrical components, wire splices, cable jackets and harness breakouts
• High strength bonding – the adhesive in ATUM tubing bonds to a wide variety of plastics, rubbers and metals
• Medium walled for increased mechanical protection
• Flame retardant jacket
• Polyolefin material – commonly used insulating material, flexible and durable
• Heat shrink ratio of 3:1 or 4:1 meaning when heated the tubing shrinks to either one third or one quarter of its original diameter
• Standard black in colour
• Operating temperature range of -55 to +110 °C
• Minimum shrink temperature: +80 °C
• Supplied in lengths of 1.2m

What does a heat shrink ratio of 3:1 or 4:1 mean?
A ratio of 3:1 means when the tube is heated it shrinks to one third of its original diameter. The original tubing size is three times larger than its shrunken form.
A ratio of 4:1 means when the tube is heated it shrinks to one quarter of its original diameter. The original tubing size is four times larger than its shrunken form.

How can I shrink the tubing?
A heat gun or a heat shrink oven are ideal ways to shrink your tubing. Before heating always check to ensure you know the correct heating temperature of your tubing.
Remember to ensure all health and safety precautions have been taken prior to using a heating devise.

Standards

AMS-DTL - 2305 3-4 (black only) UL 224 600V File (E85381)

Approvals

MIL-DTL-23053/4, Class 3

Specificaties
Kenmerk Waarde
Sleeve Diameter 32mm
Shrunk Diameter 8mm
Colour Black
Sleeve Type Heat Shrink
Adhesive Lined Yes
Shrink Ratio 4:1
Sleeve Length 1.2 m
Material Polyolefin
Flame Retardant Yes
Halogen Free No
Series ATUM
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/11/2019, met een levertijd van 1 werkdag.
Prijs Each
36,33
(excl. BTW)
43,96
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
36,33 €
15 - 49
34,52 €
50 +
32,68 €
Related Products
RS Range of halogen-free thin wall heatshrink sleeving.Give ...
Description:
RS Range of halogen-free thin wall heatshrink sleeving.Give off very low levels of toxic fumes in contact with flames.Supplied in 1.2 m length dimensions.
Typical applications for RW-175 include protection against high ...
Description:
Typical applications for RW-175 include protection against high temperatures, mechanical stress and abrasion, provision of strain relief, and chemical resistance. High flame resistance to UL VW-1Minimum shrink temperature 155°COperating temperature -55°C to +175°C Supplied in 1.2m lengthsExcellent abrasion, cut ...
The HFT5000 Series of heat shrinkable fabric has ...
Description:
The HFT5000 Series of heat shrinkable fabric has been designed for use by providing cable protection, insulation, as well as environmental sealing and strain relief across a number of different applications such as:. • Aerospace and Defence• Automotive Industry• Industrial ...
A thick wall polyolefin tubing. Excellent for exposed ...
Description:
A thick wall polyolefin tubing. Excellent for exposed applications due to its tough and weatherable design. Applied during extrusion of the tubingSmooth constant adhesive layerExcellent sealing propertiesIdeal for sealing underground or exposed inline joints and terminationsSelf extinguishing outer wall.