Stanley 340.0g HCS Hammer, 345.0 mm

  • RS-stocknr. 203-5250
  • Fabrikantnummer 1-54-712
  • Fabrikant Stanley
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

Stanley Jacketed Graphite Ball Pein Hammers

Introducing a series of jacketed graphite ball-pein hammers from Stanley. These hammers are very versatile, small enough to fit in your toolbox and strong enough to shape sheet metal. Offers excellent weight distribution which reduces fatigue, forged and heat-treated head for increased durability and a jacketed graphite handle add strength and durability.

Why would you buy these hammers?

These hammers are not only strong and durable there is care and attention to safety, reduced shock and vibration to help with fatigue plus the ergonomic design with the contoured grip gives comfort and is ribbed to ventilate your hand and allow moisture to escape.

Features and Benefits

• Heat-treated, HCS head
• Tempered Rim
• Patented head-to-handle design
• Moulded jacket over graphite handle for overstrike protection
• Cushioned grip and moulded jacket to absorb shock
• Contoured grip - ribbed to ventilate hand
• The flared end provides excellent control and reduces slip
• 5 types available
• Overall length: 311 mm, 345 mm or 380 mm

Stanley Jacketed Graphite Ball-Pein Hammer Options

• Stanley 1-54-708 – weight: 230 g = RS stock no: 203-5238
• Stanley 1-54-712 – weight: 340 g = RS stock no: 203-5250
• Stanley 1-54-716 – weight: 450 g = RS stock no: 203-5266
• Stanley 1-54-724 – weight: 680 g = RS stock no: 203-5272
• Stanley 1-54-732 – weight: 910 g = RS stock no: 203-5288

Application Information

Cross pein hammers are also known as machinist’s hammers, engineer’s hammers or mechanics hammer and are 'peening hammers' that are commonly used in metalworking. Peening is the process of hardening a surface by impact. The head of the hammer has a flat face for striking punches and cold chisels and a hemispherical 'peening' or ball face. The ball face is used for rounding off the edges of metal pins and fastenings, closing rivets and shaping and bending metal.

FAQs

What is the difference between ball-pein and cross-pein?

Cross-pein refers to the head horizontal to the handle, typically used by blacksmiths to stretch material with lateral expansion. A ball-pein has a round head used for hammering and shaping sheet metal, rounding off the edges or closing rivets.

Standards

ANSI B173·1

Specificaties
Kenmerk Waarde
Hammer Type Ball-Pein Hammer
Head Material HCS
Handle Material Graphite
Overall Length 345 mm
Weight 340g
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
25,42
(excl. BTW)
30,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
25,42 €
Related Products
Bahco Non-sparking German type Stonning hammer is a ...
Description:
Bahco Non-sparking German type Stonning hammer is a high-quality tool designed for professionals. The handle is available as either a fibreglass two component handle or a hardwood handle. Ensuring easy and safe operation. German type stonning hammer with fibreglass two-component ...
Non-sparking sledge hammer with fibreglass handle. Suitable for ...
Description:
Non-sparking sledge hammer with fibreglass handle. Suitable for industrial applications, the sledgehammer can evenly distribute force over a wide area. Sledge hammer with fibreglass two-component handleMaterial: Aluminium BronzeNon-sparkingFulfilling product standard UNE 16590.
The Picard French pattern blacksmith lump hammer has ...
Description:
The Picard French pattern blacksmith lump hammer has 32mm square face and weighs 500g. It is used for demolition or driving large objects. • Blade width is 2.8cm (1 1/8in)• Face is 2.8cm (1 1/8in)• Head length is 10cm (4in)• ...
The Picard French pattern, blacksmith lump hammer weighs ...
Description:
The Picard French pattern, blacksmith lump hammer weighs 300g. It is used for demolition or driving large objects. • Blade width is 2.2cm (7/8in)• Face is 2.2cm (7/8in)• Head length is 8.9cm (3 1/2in)• Overall length is 29.8cm (11 3/4in). ...