IP68S Hall Effect Thumbwheel 10mA Thumbwheel Through Hole Linear, -40 → +85°C, 4.5 → 5.5 V dc

  • RS-stocknr. 737-3768
  • Fabrikantnummer HTWF-1H11A22A
  • Fabrikant Otto
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Otto HTWF Series - Hall Effect Thumbwheel

The HTWF Hall Effect friction thumbwheel offers a maintained position, single axis thumbwheel actuator that provides a linear change in voltage output in either direction from centre. Options include increasing or decreasing voltage output from the centre position to the full travel position, and single or dual (redundant) outputs per axis. The HTWF thumbwheel has a rocker style snap-in mount that accommodates a 1.47 x 0.710” panel cut-out. The HTWF provides 250,000 cycle life, full forward/full backward, is sealed to IP68S and offers excellent EMI/RFI immunity. Ideal for heavy equipment, industrial machines or remote control applications.

Hall Effect contact-less sensing technology
Maintained control positioning, no return to centre
Rocker switch style mounting, snaps into 37.33 x 18.03mm panel cut-out
Behind panel depth: 35mm
Operating force: 0.25lb
Black bezel and wheel
IP68 sealed
Excellent EMI/RFI immunity
Pre-wired version is terminated with 450mm long 18AWG wires with stripped ends
Pin version is terminated with 0.635mm square pins
Detent option available (see stock number 737-3768)

Specificaties
Kenmerk Waarde
Minimum Supply Voltage 4.5V dc
Maximum Supply Voltage 5.5V dc
Supply Current 10mA
Switch Life 250000Cycles
Actuator Type Thumbwheel
Terminal Type Through Hole
Output Type Linear
IP Rating IP68S
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Supply Voltage Range 4.5 → 5.5 V dc
Operating Temperature Range -40 → +85°C
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
122,98
(excl. BTW)
148,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
122,98 €
5 - 19
118,25 €
20 - 49
113,87 €
50 +
109,80 €
Related Products
Revolutionary switches utilising Hall Effect technology, to provide ...
Description:
Revolutionary switches utilising Hall Effect technology, to provide the user with a reliable output, proportional to the travel of the button. These rugged switches are ideal for applications where a simple On/Off control is insufficient and a linear output is ...
Momentary pushbutton switches, utilising Hall Effect sensor technology, ...
Description:
Momentary pushbutton switches, utilising Hall Effect sensor technology, for long life contactless switching and designed to withstand harsh environments. Ideally suited to applications requiring repeated 'jogging', or where continuous positioning of the load is critical. Typical applications include material ...
Apem IH series hall effect push button switches ...
Description:
Apem IH series hall effect push button switches feature a very long life span due to the use of the hall effect to enable contactless switching up to 5 million operations. The IH series is also IP67 rated, further increasing ...
Single axis Hall Effect slider modules from Suregrip ...
Description:
Single axis Hall Effect slider modules from Suregrip available in three configurations: Friction maintained, proportional (spring return to centre) and detented (on-off-on).The friction maintained version is suitable for throttle control or general machine speed control. The proportional version is designed ...