Sick Analogue Inclination Sensor switching current 45 mA supply voltage 11 → 30 V dc

  • RS-stocknr. 136-9181
  • Fabrikantnummer TMM55E-PMH045
  • Fabrikant Sick
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

TMM55 Series Non-Contact Inclination Sensors

Sick TMM55 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. A simple 4-hole mounting and M12 male connector on the cable outlet offers a great deal of flexibility when mounting the sensor. With the rugged and UV-resistant plastic housing, the TMM55 inclination sensors are also ideally suited to outdoor use. Inclination angle is transmitted via analogue current or voltage signals.

Features and Benefits

Compact, two-dimensional inclination sensor Fixed measuring ranges: ±10°, ±45°, ±60°
Resolution as low as 0.01°
Compact and easy-to-mount
ABS plastic housing
IP67 rated
Fully encapsulated electronics

Sick Inclination Sensors

Specificaties
Kenmerk Waarde
Output Type Analogue
Body Style Block
Mounting Style Screw Mount
Supply Voltage 11 → 30 V dc
Terminal Type 5-Pin M12 Male Connector
Maximum DC Voltage 30V
Detection Range ±45 °
Switching Current 45 mA
Switching Frequency 18 Hz
Length 62mm
Width 32.3mm
Depth 18.7mm
Dimensions 62 x 32.3 x 18.7 mm
Short Circuit Overload Protection Yes
IP Rating IP65, IP67
Housing Material ABS
Minimum Operating Temperature -40°C
Response Time 75 ms
Reverse Polarity Protection Yes
Maximum Operating Temperature +80°C
Standards Met EN 60068-2-27, EN 60068-2-6, EN 61326-1, EN ISO 13309, EN ISO 14982, IEC 60529
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
152,88
(excl. BTW)
184,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
152,88 €
Related Products
Ifm electronic JN Series 2-axis inclination sensors are ...
Description:
Ifm electronic JN Series 2-axis inclination sensors are designed for high measurement accuracies over the whole angular range. An active temperature compensation and high protection rating ensures that they operate reliably at extreme temperatures and rough environments. Configurable via IO-Link ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet fieldSingle current sinking or current sourcing linear outputRail-to-rail operation provides more useable signal for higher accuracyResponds to either positive or negative gaussGood temperature stabilityTypical ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...