TLE4906KHTSA1 Infineon,, Bipolar Hall Effect Sensor, 2.7 → 24 V, 3-Pin SC-59

  • RS-stocknr. 826-9165
  • Fabrikantnummer TLE4906KHTSA1
  • Fabrikant Infineon
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specificaties
Kenmerk Waarde
Magnetic Type Bipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point 4.7 mT
Maximum Magnetic Sensor Operating Point 13.9 mT
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Supply Voltage 24 V
Length 3mm
Width 1.6mm
Height 1.1mm
Dimensions 3 x 1.6 x 1.1mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SC-59
Typical Magnetic Sensor Hysteresis 1.5 mT
6250 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 50)
0,561
(excl. BTW)
0,679
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 950
0,561 €
28,05 €
1000 - 1950
0,294 €
14,70 €
2000 - 4950
0,286 €
14,30 €
5000 - 9950
0,279 €
13,95 €
10000 +
0,272 €
13,60 €
*prijsindicatie
Verpakkingsopties
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Infineon linear Hall effect ICs are designed for ...
Description:
Infineon linear Hall effect ICs are designed for linear position detection and current measurement applications. The Hall effect sensors may include features such as a ratiometric analogue output. The sensors can be used for applications in linear and angular position ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...