TLE4906LHALA1 Infineon,, Unipolar Hall Effect Sensor, 2.7 → 18 V, 3-Pin SSOP

  • RS-stocknr. 753-3251
  • Fabrikantnummer TLE4906LHALA1
  • Fabrikant Infineon
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Hall Effect Switches, Infineon

A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.

Hall Effect Sensors, Infineon

A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specificaties
Kenmerk Waarde
Magnetic Type Unipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point 4.7 mT
Maximum Magnetic Sensor Operating Point 12.9 mT
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Supply Voltage 18 V
Length 4.16mm
Width 1.52mm
Height 3.29mm
Dimensions 4.16 x 1.52 x 3.29mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SSOP
Typical Magnetic Sensor Hysteresis 1.5 mT
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
180 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,874
(excl. BTW)
1,058
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 15
0,874 €
4,37 €
20 - 95
0,528 €
2,64 €
100 - 495
0,48 €
2,40 €
500 - 995
0,404 €
2,02 €
1000 +
0,358 €
1,79 €
*prijsindicatie
Verpakkingsopties
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...