A1326LUA-T Allegro Microsystems,, Linear Hall Effect Sensor, 5V, 3-Pin SIP

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.

Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.

Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.

Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 3
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
140 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
658 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
2,00
(excl. BTW)
2,42
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
2,00 €
4,00 €
10 - 18
1,62 €
3,24 €
20 - 48
1,40 €
2,80 €
50 - 98
1,185 €
2,37 €
100 +
1,08 €
2,16 €
*prijsindicatie
Verpakkingsopties
Related Products
Vertical Hall plates to measure magnetic field parallel ...
Description:
Vertical Hall plates to measure magnetic field parallel to PCB and package surface3.5V to 32V operating supply voltageOperation from unregulated power supplyReverse polarity protection (-18V)Overvoltage capability up to 42V without external resistorLow current consumptionOutput short-circuit & overtemperature ...
The MLX91205 is a single axis IMC-Hall® integrated ...
Description:
The MLX91205 is a single axis IMC-Hall® integrated current sensor featuring Triaxis® technology. It produces an analog, ratiometric output voltages proportional to the applied magnetic field parallel with the chip surface.The circuit is fabricated using a standard CMOS process, with ...
The LEM GO-SME series current transducer for electronic ...
Description:
The LEM GO-SME series current transducer for electronic measurement of current with galvanic separation between primary and secondary circuit. It has application for HVAC, small drives and E-bikes. Hall effect measuring principleLow power consumptionExtremely low profileFixed offset and sensitivityResponse time ...
The LEM GO-SMS series current transducer for electronic ...
Description:
The LEM GO-SMS series current transducer for electronic measurement of current with galvanic separation between primary and secondary circuit. It has application for drives and E-bikes. Hall effect measuring principleLow power consumptionExtremely low profileFixed offset and sensitivityResponse time is 2 ...