A1227LUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PH
Productomschrijving

A1225/7/9 High Temperature Hall Effect Latches, Allegro Microsystems

The A1225/7/9 High Temperature Hall Effect Latches are temperature-stable and stress resistant suitable for operation for temperatures up to 150°C. A Schmitt trigger circuit maintains operate and release point symmetry by compensating for temperature changes in the Hall element. Internal compensation provides magnetic switchpoints that become more sensitive with temperature, hence offsetting the usual degradation of the magnetic field with temperature.

The symmetry capability makes these devices ideal for use in pulse-counting applications where duty cycle is an important parameter. The three basic devices (A1225, A1227, and A1229) are identical except for magnetic switchpoints.

They also include a voltage regulator, Hall-voltage generator, temperature compensation circuit, signal amplifier, and a buffered open-drain output to sink up to 25 mA. The on-board regulator permits operation with supply voltages of 3.8 V to 24 V.

The first character of the part number suffix determines the device operating temperature range. Suffix L is for –40°C to 150°C. Two package styles provide a magnetically optimised package for most applications.
Available in a SOT89/TO-243AA package for surface-mount applications or three-lead ultra-mini-SIP.

Symmetrical switchpoints
Superior temperature stability
Operation from unregulated supply
Open-drain 25 mA output
Reverse battery protection
Activate with small, commercially available permanent magnets
Resistant to physical stress
Enhanced ESD structures result in 8 kV HBM ESD performance
Internal protection circuits enable 40 V load dump compliance

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -175 Gs
Maximum Magnetic Sensor Operating Point 175 Gs
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 350 (Maximum) Gs
35 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,692
(excl. BTW)
2,047
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,692 €
8,46 €
25 - 45
1,184 €
5,92 €
50 +
1,026 €
5,13 €
*prijsindicatie
Verpakkingsopties
Related Products
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.
The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect ...
Description:
The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect sensor ICs that are designed to fit angular positions with a high accuracy and small package size. The features of the Allegro A1318 and A1319 make them ideal for use in automotive ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...