Allegro Microsystems Through Hole Hall Effect Sensor, SIP, 3-Pin
- RS-stocknr.:
- 724-4676
- Fabrikantnummer:
- A1220LUA-T
- Fabrikant:
- Allegro Microsystems
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1160 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk (in een verpakking 5)
€ 1,004
(excl. BTW)
€ 1,215
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 5 - 20 | € 1,004 | € 5,02 |
| 25 - 95 | € 0,788 | € 3,94 |
| 100 - 245 | € 0,652 | € 3,26 |
| 250 - 495 | € 0,58 | € 2,90 |
| 500 + | € 0,566 | € 2,83 |
| *prijsindicatie | ||
- RS-stocknr.:
- 724-4676
- Fabrikantnummer:
- A1220LUA-T
- Fabrikant:
- Allegro Microsystems
Datasheets
Wetgeving en conformiteit
Productomschrijving
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection
Hall Effect Sensors, Allegro MicroSystems
Specificaties
Kenmerk | Waarde |
|---|---|
| Sensor Type | Hall Effect Sensors |
| Mounting Type | Through Hole |
| Magnetic Type | Bipolar |
| Maximum Operating Supply Voltage | 24 V |
| Minimum Operating Supply Voltage | 3 V |
| Package Type | SIP |
| Pin Count | 3 |
| Maximum Operating Temperature | +150 °C |
| Minimum Operating Temperature | -40 °C |