A3291KUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

A3290/1 Chopper Stabilised Precision Hall Effect Latches

The Allegro Microsystems A3290/1 Hall-effect latches are temperature-stable and stress-resistant sensor ICs. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.

A south polarity magnetic field is required to turn on the output and a north polarity field to turn off the output. An on-board regulator permits operation with supply voltages in the range of 3 V to 24 V.

Symmetrical switchpoints
Resistant to physical stress
Output short-circuit protection
Operation from unregulated supply
Reverse battery protection

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -100 Gs
Maximum Magnetic Sensor Operating Point 100 Gs
Minimum Operating Supply Voltage 4.2 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 200 (Maximum) Gs
55 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
1,188
(excl. BTW)
1,437
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,188 €
5,94 €
25 - 95
0,832 €
4,16 €
100 - 245
0,652 €
3,26 €
250 - 495
0,60 €
3,00 €
500 +
0,548 €
2,74 €
*prijsindicatie
Verpakkingsopties
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The AS5601 is an easy-to-program 12-bit On-Axis Magnetic ...
Description:
The AS5601 is an easy-to-program 12-bit On-Axis Magnetic Rotary Position Sensor with quadrature incremental and push button output. This contactless Encoder measures the absolute angle of a diametric magnetised on-axis magnet. Contactless angle measurement insensitive to dust and dirtSimple user-programmable ...