ACS712ELCTR-05B-T Allegro Microsystems,, Linear Hall Effect Sensor, 5V, 8-Pin SOIC

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Up to 50A Integrated Current Sensor ICs, Allegro MicroSystems

Current sensing package with flip-chip technology
3000 Vrms galvanic isolation
High accuracy over temperature
Typical output error of 1%

Hall Effect Current Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 8
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 4.9mm
Width 3.9mm
Height 1.5mm
Dimensions 4.9 x 3.9 x 1.5mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SOIC
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,34
(excl. BTW)
5,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
4,34 €
25 - 99
2,74 €
100 - 249
2,36 €
250 - 499
2,17 €
500 +
1,98 €
Verpakkingsopties
Related Products
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...
The ATS468 is a true zero-speed gear tooth ...
Description:
The ATS468 is a true zero-speed gear tooth sensor IC consisting of an optimized Hall IC and a permanent magnet pellet configuration in a single overmolded package. The integrated circuit provides a manufacturer-friendly solution for digital gear tooth sensing applications. ...
The A1225/7/9 High Temperature Hall Effect Latches are ...
Description:
The A1225/7/9 High Temperature Hall Effect Latches are temperature-stable and stress resistant suitable for operation for temperatures up to 150°C. A Schmitt trigger circuit maintains operate and release point symmetry by compensating for temperature changes in the Hall element. Internal ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...