A3213ELHLT-T Allegro Microsystems,, Omnipolar Hall Effect Sensor Switch, 3-Pin SOT-23

Wetgeving en conformiteit

A3213/4 Micropower Ultrasensitive Hall Effect Switches, Allegro Microsystems

The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 μW (typical, at 2.75 V).

Either a north or south pole turns on the output.

They include a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

AEC-Q100 automotive qualified
Micropower operation
Superior temperature stability
Low switchpoint drift
Insensitive to physical stress
High ESD protection

Hall Effect Sensors, Allegro MicroSystems

Kenmerk Waarde
Magnetic Type Omnipolar
Mounting Type Surface Mount
Pin Count 3
Minimum Magnetic Sensor Release Point -70 Gs
Maximum Magnetic Sensor Operating Point 70 Gs
Minimum Operating Supply Voltage 2.4 V
Maximum Operating Supply Voltage 5.5 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 10 Gs
85 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,112 €
5,56 €
25 - 95
0,778 €
3,89 €
100 - 245
0,612 €
3,06 €
250 - 495
0,564 €
2,82 €
500 +
0,55 €
2,75 €
Related Products
The AS5601 is an easy-to-program 12-bit On-Axis Magnetic ...
The AS5601 is an easy-to-program 12-bit On-Axis Magnetic Rotary Position Sensor with quadrature incremental and push button output. This contactless Encoder measures the absolute angle of a diametric magnetised on-axis magnet. Contactless angle measurement insensitive to dust and dirtSimple user-programmable ...
The Si7210 family of Hall-effect magnetic sensors from ...
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
A range of Hall-effect magnetic sensors from Silicon ...
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.