A1227LUA-T Allegro Microsystems,, Bipolar Hall Effect Sensor, 3-Pin SIP

Wetgeving en conformiteit

A1225/7/9 High Temperature Hall Effect Latches, Allegro Microsystems

The A1225/7/9 High Temperature Hall Effect Latches are temperature-stable and stress resistant suitable for operation for temperatures up to 150°C. A Schmitt trigger circuit maintains operate and release point symmetry by compensating for temperature changes in the Hall element. Internal compensation provides magnetic switchpoints that become more sensitive with temperature, hence offsetting the usual degradation of the magnetic field with temperature.

The symmetry capability makes these devices ideal for use in pulse-counting applications where duty cycle is an important parameter. The three basic devices (A1225, A1227, and A1229) are identical except for magnetic switchpoints.

They also include a voltage regulator, Hall-voltage generator, temperature compensation circuit, signal amplifier, and a buffered open-drain output to sink up to 25 mA. The on-board regulator permits operation with supply voltages of 3.8 V to 24 V.

The first character of the part number suffix determines the device operating temperature range. Suffix L is for –40°C to 150°C. Two package styles provide a magnetically optimised package for most applications.
Available in a SOT89/TO-243AA package for surface-mount applications or three-lead ultra-mini-SIP.

Symmetrical switchpoints
Superior temperature stability
Operation from unregulated supply
Open-drain 25 mA output
Reverse battery protection
Activate with small, commercially available permanent magnets
Resistant to physical stress
Enhanced ESD structures result in 8 kV HBM ESD performance
Internal protection circuits enable 40 V load dump compliance

Hall Effect Sensors, Allegro MicroSystems

Kenmerk Waarde
Magnetic Type Bipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -175 Gs
Maximum Magnetic Sensor Operating Point 175 Gs
Minimum Operating Supply Voltage 3.8 V
Maximum Operating Supply Voltage 24 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
Typical Magnetic Sensor Hysteresis 350 (Maximum) Gs
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (In a Bag of 500)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
500 +
0,73 €
365,00 €
Related Products
The ISM330DLC is a system-in-package featuring a high-performance ...
The ISM330DLC is a system-in-package featuring a high-performance 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0 applications.ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers ...
The Broadcom is a fully integrated Hall-effect based ...
The Broadcom is a fully integrated Hall-effect based isolated linear current sensors which are designed for AC or DC current sensing in industrial, commercial, and communications systems. Ratiometric output from supply voltageExtremely stable output offset voltage Near-zero magnetic hysteresis.
The MLX91205 is a single axis IMC-Hall® integrated ...
The MLX91205 is a single axis IMC-Hall® integrated current sensor featuring Triaxis® technology. It produces an analog, ratiometric output voltages proportional to the applied magnetic field parallel with the chip surface.The circuit is fabricated using a standard CMOS process, with ...
The LEM GO-SME series current transducer for electronic ...
The LEM GO-SME series current transducer for electronic measurement of current with galvanic separation between primary and secondary circuit. It has application for HVAC, small drives and E-bikes. Hall effect measuring principleLow power consumptionExtremely low profileFixed offset and sensitivityResponse time ...