4D Systems SK-43PT-AR, 4.3in Resistive Touch Screen Starter Kit for Arduino

  • RS-stocknr. 790-5703
  • Fabrikantnummer SK-43PT-AR
  • Fabrikant 4D Systems
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino

The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.

Features

4D-Labs PICASO processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
micro-SD card socket
13 x GPIO pins
I2C and UART serial communications
Powered from Arduino

Package Contents

4D Arduino adapter Shield
microSD card - 2GB or 4GB, model dependant
uUSB-PA5 programming adapter
Female to female 150mm 5-way jumper cable
5 way male to male adapter
Quick Start User Guide

Note

Arduino MCU module is not included.

For new designs the 4D Systems gen4 range of LCD displays should be considered, including:
• gen4-uLCD-24DT (RS part 1257941)
• gen4-uLCD-28DT (RS part 1257942)
• gen4-uLCD-32DT (RS part 1257943)
• gen4-uLCD-43DT (RS part 1257947)

4D Systems LCD Touchscreens

Specificaties
Kenmerk Waarde
Diagonal Display Size 4.3in
Display Technology Resistive Touch Screen
Kit Classification Starter Kit
For Use With Arduino
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
149,20
(excl. BTW)
180,53
(incl. BTW)
Aantal stuks
Per stuk
1 +
149,20 €
Related Products
The Starter kit SK-gen4-70D-PI from 4 D Systems ...
Description:
The Starter kit SK-gen4-70D-PI from 4 D Systems is for use with Raspberry Pi (RS 896-8660). The Kit offers a Diablo16 integrated 7 in display module with some accessories. The Gen4 module has a non-touch display letting you explore the ...
The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen ...
Description:
The B-LCD40-DSI1 daughterboard is an optional capacitive touchscreen display board that can be used with a Discovery development kit such as the STM32F769I-DISC1. Two interface adapters are also available. 4in TFT LCD touchscreen display panelResolution: 480 x 800 pixels (WVGA)16.7M ...
Adafruit PiTFT Plus is a 2.8 inch TFT ...
Description:
Adafruit PiTFT Plus is a 2.8 inch TFT display with Capacitive Touchscreen suitable for Raspberry Pi (Pi 3, Pi 2 includes Model A+, B).Note: Raspberry Pi computer and enclosure are not included. Features:2.8" display 320 x 240 16-bit colour pixelsScreen ...
The Adafruit PiTFT features a 2.4” display with ...
Description:
The Adafruit PiTFT features a 2.4” display with 320 x 240 16-bit colour pixels and a resistive touch overlay. As it is in HAT form, it fits neatly on top of your Raspberry Pi. (Compatible with Pi Model Zero, A+, ...