Bridgetek CleO50A, CleO 5in Resistive Touch Screen Arduino Shield With 2 x MikroBus Slots

  • RS-stocknr. 126-1742
  • Fabrikantnummer CleO50A
  • Fabrikant Bridgetek
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CleO 5.0in Touchscreen LCD for Arduino

The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip.

5.0in 800 x 480pixel TFT LCD panel with resistive touchscreen
Landscape and portrait modes supported
Anti-Aliased graphics throughout for much finer image quality
Smooth animations at up to 60fps
Direct file transfers between microSD/eFlash and Graphics subsystem without using Host processor resources
FT812 Embedded Video Engine (EVE) graphic controller
FT900 32-bit microcontroller
MicroSD card socket
8MB eFlash memory
Real-Time Clock with battery back-up
USB DFU port for firmware updates
Camera interface via 24-pin 0.5mm pitch FFC/FPC, bottom-contact connector
Support for OmniVision OV2640 camera module or CleO-CAM1A camera
PWM audio supported with speaker amplifier
I²S and CAN bus interfaces
Headers for 2 x MikroBUS modules
CR1220 coin cell holder for battery back-up
Ready to use in a panel mountable bezel
Operating temperature range: -20 to +70°C

Compatible Accessories
110-9118 NerO-LP1 Energy-efficient Arduino-format processor board
124-1039 CleO-CAM1 5Mpixel camera
124-1040 CleO-RIO1 Reverse-I/O pins Adapter Shield
124-1041 CleO-SPK1 0.5W Speaker
124-1042 MS-C6-8G MicroSD Flash card, 8GB, Class 6

Approvals

CE FCC

Specificaties
Kenmerk Waarde
Diagonal Display Size 5in
Display Technology Resistive Touch Screen
Kit Classification Arduino Shield
Featured Device 2 x MikroBus Slots
Kit Name CleO
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
131,52
(excl. BTW)
159,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
131,52 €
Related Products
RF Solutions ZULU-M-Arduino shield adds a wireless communication ...
Description:
RF Solutions ZULU-M-Arduino shield adds a wireless communication link to an Arduino/Arduino-compatible processor board. The ZULU-M868 Modem module is a highly integrated RF Modem and intelligent controller with a UART serial interface. It is designed to implement a basic bi-directional ...
The BRAVO-ARD Shield fits directly on top of ...
Description:
The BRAVO-ARD Shield fits directly on top of an Arduino processor board adding a BRAVO-T868 SmartRadio module for long-range wireless remote control functionality. It can work with hand-held transmitters or another BRAVO-ARD to provide a telemetry link. RF Carrier Frequency: ...
The KAPPAR-ARD Module Shield serves as an interface ...
Description:
The KAPPAR-ARD Module Shield serves as an interface between an Arduino processor board and the supplied KAPPA-T868 radio telemetry receiver module. KAPPA-T868 moduleRF Carrier Frequency: 868.5MHz ISM BandRF Power Output: +13dBmReceiver Sensitivity: -121dBm @ 19200bpsRange: up to 500m (line of ...
The GAMMA LoRa RF Module Shield serves as ...
Description:
The GAMMA LoRa RF Module Shield serves as an interface between your Arduino board and a GAMMA-868 telemetry module. The shield can sit right on top of your Arduino processor board. GAMMA-868 moduleRF Carrier Frequency: 869.5MHz ISM BandRF Power Output: ...