Adafruit 2478, 2.4in Resistive Touch Screen Add On Board for Development Projects

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket

This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.

When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.

SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.

In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).

If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.

4 white LED backlight, transistor connected so you can use PWM to dim the backlight
4-wire resistive touchscreen
Screen Dimensions: 43 x 60 x 4 mm (1.7" x 2.4" x 0.16")
PCB Dimensions: 53 x 60 x 4 mm (2.1" x 2.4" x 0.16")
Weight: 30.5 g

Adafruit LCD Touchscreens

Specificaties
Kenmerk Waarde
Diagonal Display Size 2.4in
Display Technology Resistive Touch Screen
Kit Classification Add On Board
For Use With Development Projects
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
24,53
(excl. BTW)
29,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
24,53 €
Related Products
The ISL79985-EVAL board evaluates the ISL79985, 4-Channel Differential ...
Description:
The ISL79985-EVAL board evaluates the ISL79985, 4-Channel Differential Input Analogue Video Decoder with MIPI CSI-2 output. The device is aimed at providing an all-around camera view for automotive ADAS applications. Four high-quality NTSC/PAL/SECAM video decodersSoftware selectable analogue input controlFour ...
The CleO graphics display panel allows easy development ...
Description:
The CleO graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 3.5in 320 ...
The CleO50 graphics display panel allows easy development ...
Description:
The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 5.0in 800 ...
The Microchip display development board is a highly ...
Description:
The Microchip display development board is a highly integrated, compact and flexible development platform with a 4.3in colour LCD. It integrates with the PIC32MZ starter kits for a complete graphics development solution. The MEB-II kit features a 4.3inch WQVGA maXTouch ...