4D Systems SK-gen4-43DT-PI, Gen4 Diablo16 4.3in Resistive Touch Screen Starter Kit for Raspberry Pi

  • RS-stocknr. 106-5296
  • Fabrikantnummer SK-gen4-43DT-PI
  • Fabrikant 4D Systems
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

4.3 inch LCD Display Starter Kit for Raspberry Pi (gen4-uLCD-43DT-PI)

The starter kit SK-gen4-43DT-PI from 4 D Systems is intended for use with the Raspberry Pi (see 896-8660). The Kit offers an integrated Diablo16 graphics controller 4.3 in display module with some accessories included. The Gen4 uLCD module has a resistive touch display and it allows you to explore the 4D Workshop4 environments that helps access all the features with your application.

With the Designer environment, you can use all the features of the display. The micro-SD card for displaying images, video and sound. Data logging can be achieved via a programming cable or adapter letting you download compiled code and PmmC/Firmware updates. The ViSi and ViSi-Genie environments are similar and they are image-based which need a micro SD card as well as a programming cable. There is no micro SD card requirement or programming cable for the Serial environment once it is been configured as a Serial device. The micro SD card can be used though for storage or even changing to one of the other program environments.

The 4.3” Diablo16 display module works with the 4D Programming Cable, uUSB-PA5-II and 4D Arduino adapter Shield-II. It comes complete with gen4-PA, gen4-IB and the 4D Serial Pi adapter along with other accessories.

In the box
Gen4 Integrated Display Module: gen4-uLCD-43DT Display with resistive touch
4D Serial Pi adapter
Gen4 Interface Module: gen4-IB
Gen4 Programming adapter: gen4-PA
4 GB micro SD Card
150 mm FFC Cable: 5-way female-to-female ribbon cable with male-to-male adapter
Quick Start Guide

Feature List
Display Size: 4.3”
Controller: Diablo16
Display Resolution: 480 x 272
Display Brightness: ∼460 nits
Backlight LEDs: 2 x 5
Touch: Resistive
Connector: 30 way FPC
Display Viewing Area (mm): 95.04 x 53.86
Module Dimensions (mm): 127.6 x 69.3 x 7.9
Operating Ambient Temperature: -15°C to +65°C
Storage Temperature: -30°C to +70°C

4D Systems gen4 LCD Display Modules

Specificaties
Kenmerk Waarde
Diagonal Display Size 4.3in
Display Technology Resistive Touch Screen
Kit Classification Starter Kit
Kit Name Gen4 Diablo16
For Use With Raspberry Pi
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
105,06
(excl. BTW)
127,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
105,06 €
5 +
99,79 €
Related Products
The Adafruit PiTFT features a 2.4” display with ...
Description:
The Adafruit PiTFT features a 2.4” display with 320 x 240 16-bit colour pixels and a resistive touch overlay. As it is in HAT form, it fits neatly on top of your Raspberry Pi. (Compatible with Pi Model Zero, A+, ...
Description:
The PiTFT Plus are a range of TFT LCD resistive touchscreens designed specifically to fit neatly onto the top of a Raspberry Pi.They are available with 3 screen sizes: 2.8, 3.2 and 3.5 inch. • Low power consumption, suitable for ...
FeatherWings add specific functionality to your Feather development ...
Description:
FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.The FeatherWing OLED adds a 128 x 32 pixel monochrome OLED plus 3 buttons to your Feather project.OLED screens are ...
Grove - OLED Display 0.96"is an OLED monochrome ...
Description:
Grove - OLED Display 0.96"is an OLED monochrome 128´64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low ...