XY2CJ Cable Switch with E-Stop, Left Side, 30m, NC/NO

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: ID
Productomschrijving

Telemecanique XY2CJ Emergency Stop Rope Pull Switches

The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works.

Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category
Embedded safety spring ensures function is maintained in the event of spring damage
Fast mounting and wire adjustment with tensioner accessory
Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart
Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR
Four position turret head rotatable by 90° turns
Various electrical connections options available
IP66 / IP67 protection

Standards

IEC 60947-5-5.

Approvals

CE, UL, cULus, NiDS, CCC.

Specificaties
Kenmerk Waarde
Range Preventa
Series XY2CJ
Reset Button Yes
Pole Configuration 2P
Normal State Configuration NC/NO
Mounting Orientation Left Side
Maximum Rope Span 30m
Maximum Current 3 A @ 240 V ac, 270 mA @ 250 V dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Housing Material Zamak
Number of Cable Entries 1
Size of Cable Entries PG13.5
Width 64.2mm
E-Stop Button Yes
Maximum Operating Temperature +70°C
IP Rating IP66, IP67
Length 158mm
Dimensions 158 x 64.2 x 109 mm
Depth 109mm
Minimum Operating Temperature -25°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
82,30
(excl. BTW)
99,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
82,30 €
Related Products
Maximum rope span 30mSwitch lock-out on rope pulled ...
Description:
Maximum rope span 30mSwitch lock-out on rope pulled and slackIndustry standard fixing centres to DIN/EN 50041Can be installed along or around awkward machinery such as conveyers to provide a constant access emergency stop facilityRope status indicator on switch lidTension Force ...
The PSENrope from Pilz is a manually operated ...
Description:
The PSENrope from Pilz is a manually operated rope pull switch used to safely shut down functional processes that extend over a wide area, such as conveyors. It provides maximum safety, as the emergency stop function can be triggered at ...
The 3SE7 series of grab wire switches (trip ...
Description:
The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.As the effective range of a grab wire switch is only limited by the ...
The 1CPS cable pull safety switch series is ...
Description:
The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable ...