GLS-SS Cable Switch with E-Stop, 100m, 2NO/2NC

  • RS-stocknr. 826-4117
  • Fabrikantnummer 144015
  • Fabrikant IDEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

IDEM Guardian Line GLS-SS Stainless Steel Safety Rope Pull Switches

The Guardian Line GLS-SS from IDEM are safety rope pull switches with a stainless steel 316 housing able to withstand the tough environments found in the Food and Pharmaceutical industries. The fixing holes are under the cover of the switch to prevent food trap areas and can withstand chemical and detergent washdown due to all stainless steel parts and robust IP69K sealing by using integral bellows and gaskets.
They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.

Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 80m (260 feet) can be covered using only a single switch and safety spring
Upto 100m (328 feet) can be covered using two switches
Positive break contacts to IEC60947-5-1
Stainless steel 316 housing
IP69 protection
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole 2NO / 2 NC

Note

826-4108 has an LED, 826-4117 has an E-stop, 826-4110 has LED and E-stop.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

CE, cULus, TUV.

Specificaties
Kenmerk Waarde
Range Guardian Line
Series GLS-SS
Reset Button Yes
Pole Configuration 4P
Normal State Configuration 2NO/2NC
Maximum Rope Span 100m
Maximum Current 2.5 A
Maximum AC Voltage 250V ac
Maximum DC Voltage 250V
Housing Material 316 Stainless Steel
Number of Cable Entries 3
Conduit Entry M20
Size of Cable Entries M20
Length 239mm
IP Rating IP67, IP69K
Maximum Operating Temperature +80°C
E-Stop Button Yes
Width 65mm
Dimensions 239 x 65 x 55 mm
Minimum Operating Temperature -25°C
Depth 55mm
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
238,84
(excl. BTW)
289,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
238,84 €
Related Products
The XY2-CH emergncy stop rope pull switch (also ...
Description:
The XY2-CH emergncy stop rope pull switch (also known as a grab wire switch) is ideal for applications such as conveyor systems, packaging, textiles, transfer machines, presses, woodworking equipment, paint lines and test laboratories. For machine tools, conveyers & handling ...
Maximum rope span 30mSwitch lock-out on rope pulled ...
Description:
Maximum rope span 30mSwitch lock-out on rope pulled and slackIndustry standard fixing centres to DIN/EN 50041Can be installed along or around awkward machinery such as conveyers to provide a constant access emergency stop facilityRope status indicator on switch lidTension Force ...
Designed to offer grabwire switch protection for personnel ...
Description:
Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machinesTypical applications:- conveyors, assembly lines, transfer lines, packaging machinery, process equipmentDouble grabwire switches are a convenient way of installing two rope pull ...
The XY2-CH emergncy stop rope pull switch (also ...
Description:
The XY2-CH emergncy stop rope pull switch (also known as a grab wire switch) is ideal for applications such as conveyor systems, packaging, textiles, transfer machines, presses, woodworking equipment, paint lines and test laboratories. For machine tools, conveyers & handling ...