GLM Cable Switch with E-Stop, Straight, 50m, 3NC, NO

  • RS-stocknr. 826-4101
  • Fabrikantnummer 143066A
  • Fabrikant IDEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

IDEM Guardian Line GLM Mini Safety Rope Pull Switches

The Guardian Line GLM from IDEM are safety rope pull switches with a compact yet robust yellow diecast housing that protect short conveyor lengths of upto 50m and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.

Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 30m can be covered using a single switch
Upto 50m can be covered using two switches
Positive break contacts to IEC60947-5-1
Robust yellow diecast housing
IP67 protection
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole, either 3NC / 1NO or 2NC / 2NO

Note

826-4101 & 826-4104 have an E-stop and LED.

Standards

IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Approvals

CE, cULus, TUV.

Specificaties
Kenmerk Waarde
Range Guardian Line
Series GLM
Reset Button Yes
Pole Configuration 4P
Normal State Configuration NO, 3NC
Mounting Orientation Straight
Maximum Rope Span 50m
Maximum Current 2.5 A
Maximum AC Voltage 250V
Maximum DC Voltage 250V
Housing Material Die Cast Aluminium
Number of Cable Entries 3
Conduit Entry M20
Size of Cable Entries M20
IP Rating IP67
Width 57mm
Length 205mm
Depth 57mm
Minimum Operating Temperature -25°C
Dimensions 205 x 57 x 57 mm
E-Stop Button Yes
Maximum Operating Temperature +80°C
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
128,36
(excl. BTW)
155,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
128,36 €
Related Products
The Schmersal TESK series safety hinge switch has ...
Description:
The Schmersal TESK series safety hinge switch has 1NO/2NC state configuration. The conduit entry is M12 and number of cable entries is 1. It has a contact current rating of 2A AC and 1A DC at a voltage rating of ...
A position switch with cable control is an ...
Description:
A position switch with cable control is an ideal form of emergency stop within large environments such as factories and production lines. Schneider Electric presents the XY2CD, this position sensor is controllable from anywhere within a work area. Also known ...
The Schneider XCS-DMR coded magnetic safety switches are ...
Description:
The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. ...
Developed to satisfy the latest IECEx and ATEX ...
Description:
Developed to satisfy the latest IECEx and ATEX standards, the IDEM range of non-contact safety interlock switches provide explosion proof switching for hazardous conditions created within the petro-chemical, pharmaceutical, food processing and packaging industries. Made from stainless steel 316, these ...