1CPS Cable Switch, Straight, 76m, 2NO/2NC

  • RS-stocknr. 820-3339
  • Fabrikantnummer 1CPSC2A
  • Fabrikant Honeywell
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Honeywell 1CPS Cable Pull Safety Switches

The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.

The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.

For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.

Direct opening actions of normally closed contacts
Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations
Typical 76 meter cable span
Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)
Die cast zinc housing
Both gold plated or silver plated contacts available
Optional hardware packs available
UL, CE, CSA, SIL 3 capable

Specificaties
Kenmerk Waarde
Series 1CPS
Reset Button Yes
Normal State Configuration 2NO/2NC
Mounting Orientation Straight
Maximum Rope Span 76m
Maximum Current 10 A
Maximum AC Voltage 600V
Maximum DC Voltage 250V
Housing Material Die Cast Zinc
Number of Cable Entries 1
Conduit Entry 20 mm
Size of Cable Entries 20 mm
Width 99.06mm
Length 172.72mm
IP Rating IP67
Maximum Operating Temperature +80°C
E-Stop Button No
Dimensions 172.72 x 99.06 x 62.2 mm
Minimum Operating Temperature -25°C
Depth 62.2mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
259,54
(excl. BTW)
314,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
259,54 €
Related Products
The Lifeline 4 rope pull switch, also known ...
Description:
The Lifeline 4 rope pull switch, also known as a cable pull switch or grab wire switch, can be installed along or around awkward machinery such as conveyors and provides constant emergency stop access. The positive mode mechanism helps ensure ...
These emergency stop trip wire switches are designed ...
Description:
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function ...
The ER series of safety rope pull switches ...
Description:
The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage spans, rope pull switches eliminate the need for numerous E-stop buttons reducing installation time ...
The Guardian Line GLS from IDEM are safety ...
Description:
The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted ...