The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage spans, rope pull switches eliminate the need for numerous E-stop buttons reducing installation time and costs. The ER series rope pull switch is available as standard, with an E-stop button or with an indicator beacon.
Long rope spans up to 80m means fewer number of switches required per application
Tension indicator makes the system easy to set up and to maintain the proper rope tension
IP67 (NEMA 6) enclosure enables the switch to withstand water wash down cleaning
Available in die-cast aluminium or stainless steel housing with a stainless steel eye nut
A blue reset button is provided to easily return the unit back to its machine run position after actuation
Long life switch designed for a minimum of one million actuations
The snap-acting switch contacts protect against nuisance tripping due to vibration
Models with the E-stop button have 2 mounting positions and may be installed or repositioned in the field
Models with the optional dual indicator beacon (24 Vdc) can be wired to flash red to indicate a tripped switch or glow a constant green to indicate a properly reset switch
The Omron ER series of rope pull emergency stop switch has 1NO/2NC contact configuration. It is designed to be tough and durable for even the most demanding applications. It has long coVerage spans, rope pull switches, which eliminates the need for numerous E-stop buttons reducing installation time and costs. It also has a rope pull switch which is available as standard, with an E-stop button or with an indicator beacon. This product has a blue reset button for easy return the unit back to its machine running position after actuation. The long-life switch is designed for a minimum of one million actuations. This switch has a rope span of 40m and an electrical current rating of 3A at a voltage rating of 240VAC.
Size of cable entry is M20
Tension indicator makes the system easy to set up and to maintain the proper rope tension
Die-cast aluminium housing with a stainless steel eye nut
Snap-acting switch contacts protect against nuisance tripping due to vibration
Blue reset button is provided to easily return the unit back to its machine running position after actuation
IP67 rated
IEC947-5-1
IEC947-5-5
EN418
UL508
BS5304
CE certified
UL approved
Kenmerk | Waarde |
---|---|
Series | ER |
Reset Button | Yes |
Normal State Configuration | NO/2NC |
Mounting Orientation | Straight |
Maximum Rope Span | 40m |
Maximum Current | 3 A |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 24V |
Housing Material | Die Cast Aluminium |
Number of Cable Entries | 3 |
Conduit Entry | M20 x 3 |
Size of Cable Entries | M20 |
Minimum Operating Temperature | -25°C |
Depth | 74mm |
Dimensions | 205 x 90 x 74 mm |
E-Stop Button | No |
Maximum Operating Temperature | +80°C |
IP Rating | IP67 |
Length | 205mm |
Width | 90mm |